The Bobcat CT335 is a 4WD compact utility tractor manufactured by Daedong for distributor Bobcat in Daegu, South Korea from 2008 to 2013. The Bobcat CT335 is equipped with a 1.8 L (109.8 cu·in) three-cylinder diesel engine and one of two transmissions: a hydrostatic transmission with infinite (3-range) forward and infinite reverse gears or a shuttle transmission with 12 forward and 12 reverse gears.
The Bobcat CT335 compact utility tractor used the Daedong 3B183 engine. It is a 1.8 L, 1,799 cm2, (109.8 cu·in) three-cylinder natural aspirated diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 102.4 mm (4.03 in) of the piston stroke. The compression ratio rating is 22.0:1. This engine produced 38.5 PS (28.3 kW; 38.0 HP) at 2,600 rpm of output power and 119.6 N·m (12.2 kg·m, 88.1 ft·lb) at 1,700 rpm of torque.
The CT335 is equipped with hydrostatic power steering, differential wet disc brakes, ROPS or cab (optional), and 45.0 liters (12.0 US gal, 9.9 Imp. gal) fuel tank.
Following attachments are available for the Bobcat CT335 compact utility tractor:
- Bobcat 8TL loader
- Bobcat 7TB backhoe
- Bobcat 8TB backhoe
Bobcat CT335 Specifications
| General Specifications | |
| Model | Bobcat CT335 |
| Length | 3,270 mm (128.7 in) |
| Width | 1,590 mm (62.6 in) |
| Height | ROPS: 1,610 mm (63.4 in) Cab: 2,400 mm (94.5 in) |
| Wheel base | 1,760 mm (69.3 in) |
| Ground clearance | 340 mm (13.4 in) |
| Weight | ROPS: 1,665 kg (3,671 lbs) Cab: 1,850 kg (4,079 lbs) |
| Fuel tank capacity | 45.0 liters (12.0 US gal, 9.9 Imp. gal) |
| Battery | 12V |
| Cabin type | ROPS or Cab (optional) |
| Engine | |
| Engine model | Daedong 3B183 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.8 L, 1,799 cm2, (109.8 cu·in) |
| Bore and stroke | 87.0 mm X 102.4 mm (3.43 in X 4.03 in) |
| Compression ratio | 22.0:1 |
| Horsepower | 38.5 PS (28.3 kW; 38.0 HP) at 2,600 rpm |
| Torque | 119.6 N·m (12.2 kg·m, 88.1 ft·lb) at 1,700 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Differential wet disc |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (3-range) forward and infinite reverse |
| Speed | Forward: 25.3 kmh (15.7 mph) Reverse: 17.2 (10.7 mph) |
| Transmission model | – |
| Transmission type | Shuttle |
| Gears | 12 forward and 12 reverse |
| Speed | Forward: 24.0 kmh (14.9 mph) Reverse: 21.4 (13.3 mph) |
| Tires | |
| Front tires | Ag: 7×16 Lawn/turf: 27×8.5-15 Industrial: 27×10.5-15 |
| Rear tires | Ag: 12.4×24 Lawn/turf: 41×14-20 Industrial: 43×16-20 |
| Three-Point Hitch | |
| Category | I |
| Control type | – |
| Lift capacity (at 610 mm/24 in) | 770 kg (1,700 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | Optional |
| Middle PTO speed | 2,000 rpm |
| Rear PTO type | Independent |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | – |
| Valves | 1 or 2 |
| Pump flow | 7.9 gpm (29.9 lpm) |
| Steering flow | 6.6 gpm (25 lpm) |
| Total flow | 14.5 gpm (54.9 lpm) |
Be the first to comment