The Wheel Horse 417-A is a 2WD garden tractor from the 400 series. This tractor was manufactured by Wheel Horse in South Bend, Indiana, USA from 1985 to 1986. The Wheel Horse 417-A is equipped with a 0.7 L (42.2 cu·in) two-cylinder gasoline engine and a belt-driven hydrostatic transmission with infinite forward and reverse gears.
The Wheel Horse 417A garden tractor used the Kohler KT17QS engine. It is a 0.7 L, 691 cm2, (42.2 cu·in) two-cylinder natural aspirated gasoline engine with 79.0 mm (3.11 in) of the cylinder bore and 70.0 mm (2.76 in) of the piston stroke. This engine produced 17.3 PS (12.7 kW; 17.0 HP) at 3,600 rpm of output power.
The Wheel Horse 417-A is equipped with manual steering, an open operator station, and 11.4 liters (3 US gal.; 2.5 Imp. gal) fuel tank.
Following attachments are available for the Wheel Horse 417-A garden tractor:
- Mid-mount Wheel Horse 910 mm (36 in) mower deck
- Mid-mount Wheel Horse 1,060 mm (42 in) mower deck
- Mid-mount Wheel Horse 1,210 mm (48 in) mower deck
Wheel Horse 417-A Specifications
General Specifications | |
Model | Wheel Horse 417A |
Length | 1,650 mm (65 in) |
Width | 960 mm (37.8 in) |
Height | 1,050 mm (41.3 in) |
Wheel base | 1,150 mm (45.3 in) |
Weight | 287 kg (633 lbs) |
Fuel tank capacity | 11.4 liters (3 US gal.; 2.5 Imp. gal) |
Battery | 12V |
Cabin type | Open operator station |
Engine | |
Engine model | Kohler KT17QS |
Engine type | Four-stroke, air-cooled |
Cylinders | 2 |
Fuel type | Gasoline |
Displacement | 0.7 L, 691 cm2, (42.2 cu·in) |
Bore and stroke | 79.0 mm X 70.0 mm (3.11 in X 2.76 in) |
Horsepower | 17.3 PS (12.7 kW; 17.0 HP) at 3,600 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual |
Brakes | – |
Transmission model | Eaton 1100 |
Transmission type | Belt-driven hydrostatic |
Gears | Infinite forward and reverse |
Speed | Forward: 11.3 kmh (7 mph) Reverse: 7.2 kmh (4.5 mph) |
Tires | |
Front tires | Lawn/turf: 15×6.00-6 |
Rear tires | Lawn/turf: 22×7.50-12 |
Three-Point Hitch | |
Category | Sleeve hitch |
Control type | – |
Lift capacity (at ends) | – |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
I need diag of. lift bar. for dozer blade