The John Deere 2032R is a 4WD compact utility tractor from the 2R series. This tractor was manufactured by John Deere in Augusta, Georgia, USA from 2013 to 2019. This first generation was manufactured from 2013 to 2016. The John Deere 2032R is equipped with a 1.6 L (100.0 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite (2-range) forward and reverse gears.
The JD 2032R compact utility tractor used the Yanmar 3TNV88 engine. It is a 1.6 L, 1,638 cm2, (100.0 cu·in) three-cylinder natural aspirated diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. The compression ratio rating is 19.1:1. This engine produced 32.5 PS (23.9 kW; 32.0 HP) at 2,500 rpm of output power.
The John Deere 2032R is equipped with power steering, wet disc brakes, two-post foldable ROPS, and 27.0 liters (7.1 US gal.; 5.9 Imp. gal) fuel tank.
Following attachments are available for the JD 2032R compact utility tractor:
- Mid-mount John Deere 62D: 1,570 mm (62 in) mower deck
- Mid-mount John Deere: 1,820 mm (72 in) mower deck
- Front-mount John Deere: 1,370 mm (52 in) blade
- Front-mount John Deere: 1,370 mm (52 in) two-stage snowblower
- John Deere H130 loader
- John Deere 46 backhoe
John Deere 2032R Specifications
| General Specifications | |
| Model | John Deere 2032R |
| Length | 2,760 mm (108.7 in) |
| Width | 1,410 mm (55.5 in) |
| Height | ROPS: 2,270 mm (89.4 in) |
| Wheel base | 1,650 mm (65 in) |
| Ground clearance (front axle) | 330 mm (13 in) |
| Weight (shipping) | 894 kg (1,971 lbs) |
| Fuel tank capacity | 27.0 liters (7.1 US gal.; 5.9 Imp. gal) |
| Battery | 12V, CCA 500A |
| Cabin type | Two-post foldable ROPS |
| Engine | |
| Engine model | Yanmar 3TNV88 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.6 L, 1,638 cm2, (100.0 cu·in) |
| Bore and stroke | 88.0 mm X 90.0 mm (3.46 in X 3.54 in) |
| Compression ratio | 19.1:1 |
| Horsepower | 32.5 PS (23.9 kW; 32.0 HP) at 2,500 rpm |
| Starter | Electric |
| Oil capacity: | 3.4 L (3.6 US. qt, 3 Imp. qt.) |
| Coolant capacity: | 4.0 L (4.2 US. qt, 3.5 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc |
| Final drive | Spur gear |
| Differential lock | Standard |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (2-range) forward and reverse |
| Speed | Forward: 21.7 kmh (13.5 mph) Reverse: 21.7 kmh (13.5 mph) |
| Transmission oil capacity | 14.8 L (3.9 US. gal, 3.3 Imp. gal.) |
| Tires | |
| Front tires | Lawn/turf: 24×8.5-14 Industrial: 23×8.5-12 |
| Rear tires | Lawn/turf: 36×14.00-15 Industrial: 14-17.5 |
| Three-Point Hitch | |
| Category | I |
| Control type | Position control |
| Lift capacity (at ends) | 650 kg (1,433 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | Independent |
| Middle PTO speed | 2,100 rpm |
| Rear PTO type | Independent with wet disc clutch |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 14.8 L (3.9 US. gal, 3.3 Imp. gal.) |
| Pressure | 2420 psi (166.9 bar) |
| Valves | 2 |
| Pump flow | 5.0 gpm (18.9 lpm) |
| Steering flow | 5.5 gpm (20.8 lpm) |
| Total flow | 10.5 gpm (39.7 lpm) |
Be the first to comment