The John Deere 2440 is a 2WD utility tractor from the 2040 series. This tractor was manufactured by John Deere in Dubuque, Iowa, USA, and Mannheim, Baden-Württemberg, Germany from 1976 to 1982. This second-generation was manufactured from 1980 to 1982 in Mannheim, Baden-Württemberg, Germany. The JD 2440 is equipped with a 3.6 L (219.0 cu·in) four-cylinder diesel engine and one of three transmissions: a collar shift transmission with 8 forward and 4 reverse gears, a two-speed power shift with dry disc clutch transmission with 16 forward and 8 reverse gears or a power shuttle transmission with 8 forward and 8 reverse gears.
The John Deere 2440 utility tractor used the John Deere engine. It is a 3.6 L, 3,589 cm2, (219.0 cu·in) four-cylinder natural aspirated diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 61.5 PS (45.2 kW; 60.6 HP) at 2,500 rpm of output power.
The JD 2440 is equipped with power steering, hydraulic wet disc brakes, two-post ROPS, and 73.8 liters (19.5 US gal.; 16.2 Imp. gal) fuel tank.
John Deere 2440 Specifications
General Specifications | |
Model | John Deere 2440 |
Length | 3,540 mm (139.4 in) |
Width | 1,760 mm (69.3 in) |
Height | 1,550 mm (61 in) |
Wheel base | Straight axle: 2,170 mm (85.4 in) Swept axle: 2,010 mm (79.1 in) |
Ground clearance (front axle) | 640 mm (25.2 in) |
Weight (shipping) | 2,155 kg (4,751 lbs) |
Fuel tank capacity | 73.8 liters (19.5 US gal.; 16.2 Imp. gal) |
Battery | 12V |
Cabin type | Two-post ROPS |
Engine | |
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 3.6 L, 3,589 cm2, (219.0 cu·in) |
Bore and stroke | 102.0 mm X 110.0 mm (4.02 in X 4.33 in) |
Horsepower | 61.5 PS (45.2 kW; 60.6 HP) at 2,500 rpm |
Starter | Electric |
Coolant capacity: | 11.4 L (12 US. qt, 10 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Power |
Brakes | Hydraulic wet disc |
Final drive | Planetary |
Differential lock | Mechanical rear |
Transmission model | – |
Transmission type | Collar shift |
Gears | 8 forward and 4 reverse |
Speed | Forward: 26.2 kmh (16.3 mph) Reverse: 8.7 kmh (5.4 mph) |
Transmission model | Hi-Lo |
Transmission type | Two-speed power shift with dry disc clutch |
Gears | 16 forward and 8 reverse |
Transmission model | Direction Reverser |
Transmission type | Power shuttle |
Gears | 8 forward and 8 reverse |
Tires | |
Front tires | Ag: 7.50-16 |
Rear tires | Ag: 16.9-28 |
Three-Point Hitch | |
Category | II/I |
Control type | Position control and lower-link draft sensing |
Lift capacity (at ends) | 1,090 kg (2,400 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent or live |
Rear PTO speed | 540 or 540/1000 rpm |
Hydraulic system | |
Hydraulic type | Closed center |
Pressure | 2250 psi (155.1 bar) |
Valves | 1 or 2 |
Pump flow | 13.0 gpm (49.2 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment