Massey Ferguson 375 (1987-1988)

Massey Ferguson 375The Massey Ferguson 375 is a 2WD or 4WD utility tractor from the 300 series. This tractor was manufactured by Massey Ferguson in Coventry, England from 1987 to 1997. This first version was manufactured from 1987 to 1988. The MF 375 is equipped with a 3.9 L (236.0 cu·in) four-cylinder diesel engine and one of two transmissions: a synchromesh transmission with 12 forward and 4 reverse gears or a two-speed power shift transmission with 12 forward and 4 reverse gears.

The Massey Ferguson 375 utility tractor used the Perkins A4.236 engine. It is a 3.9 L, 3,867 cm2, (236.0 cu·in) four-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 127.0 mm (5.0 in) of the piston stroke. This engine produced 57.8 PS (42.5 kW; 57.0 HP) at 2,200 rpm of PTO output power.

The Massey Ferguson 375 is equipped with hydrostatic power steering, wet disc brakes, two-post ROPS, and 107.9 liters (28.5 US gal.; 23.7 Imp. gal) fuel tank.

Massey Ferguson 375 Specifications

General Specifications
ModelMassey Ferguson 375
Length 2WD: 3,660 mm (144.1 in)
4WD: 3,880 mm (152.8 in)
Width
Height 2WD: 2,380 mm (93.7 in)
4WD: 2,430 mm (95.7 in)
Wheel base
Weight 2WD: 2,740 kg (6,041 lbs)
4WD: 3,265 kg (7,198 lbs)
Fuel tank capacity107.9 liters (28.5 US gal.; 23.7 Imp. gal)
Battery12V
Cabin typeTwo-post ROPS
Engine
Engine modelPerkins A4.236
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement3.9 L, 3,867 cm2, (236.0 cu·in)
Bore and stroke98.0 mm X 127.0 mm (3.86 in X 5 in)
Horsepower57.8 PS (42.5 kW; 57.0 HP) at 2,200 rpm
StarterElectric
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesWet disc
Transmission model
Transmission typeSynchromesh
Gears12 forward and 4 reverse
Transmission modelMulti-Power
Transmission typeTwo-speed power shift
Gears12 forward and 4 reverse
Tires
Front tires Ag: 6.50-16 (2WD), 11.2-24 (4WD)
Rear tires Ag: 16.9-24 (2WD), 16.9-28 (4WD)
Three-Point Hitch
CategoryII
Control typePosition and draft control
Lift capacity (at ends)1,815 kg (4,000 lbs)
PTO (Power take-off shaft)
Rear PTO typeLive
Rear PTO speed540, 540/1000 rpm
Hydraulic system
Hydraulic type
Pressure3000 psi (206.8 bar)
Pump flow Linkage pump: 4.4 gpm (16.7 lpm)
Linkage pump (optional): 7.2 gpm (27.2 lpm)
Aux. pump: 9.5 gpm (36.0 lpm)
Total flow 13.9 gpm (52.6 lpm)
16.8 gpm (63.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*