John Deere 820 (1968-1973)

John Deere 820 (1968-1973)The John Deere 820 is a 2WD utility tractor manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1968 to 1973. The John Deere 820 is equipped with a 2.5 L (151.9 cu·in) three-cylinder diesel engine and one of two transmissions: a sliding gear transmission with 7 forward and 1 reverse gears or a collar shift transmission with 8 forward and 4 reverse gears.

The JD 820 utility tractor used the John Deere diesel engine. It is a 2.5 L, 2,489 cm2, (151.9 cu·in) three-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 16.7:1. This engine produced 32.5 PS (23.9 kW; 32.0 HP) at 2,100 rpm of output power.

Following attachments are available for the John Deere 820 utility tractor:

  • Front-mount John Deere 523: 1,820 mm (72 in) blade
  • John Deere 37 loader
  • John Deere 165 backhoe

John Deere 820 Specifications

General Specifications
ModelJohn Deere 820
Length3,420 mm (134.6 in)
Width2,050 mm (80.7 in)
Height1,990 mm (78.3 in)
Wheel base1,880 mm (74 in)
Weight
Fuel tank capacity62.5 liters (16.5 US gal.; 13.7 Imp. gal)
BatteryTwo 12V, 55Ah
Cabin typeOpen operator station or ROPS (optional)
Engine
Engine modelJohn Deere
Engine typeFour-stroke, liquid-cooled, inline
Cylinders3
Fuel typeDiesel
Displacement2.5 L, 2,489 cm2, (151.9 cu·in)
Bore and stroke98.0 mm X 110.0 mm (3.86 in X 4.33 in)
Compression ratio16.7:1
Horsepower32.5 PS (23.9 kW; 32.0 HP) at 2,100 rpm
StarterElectric
Oil capacity:6.2 L (6.6 US. qt, 5.5 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering type
Brakes
Differential lockMechanical rear
Transmission model
Transmission typeSliding gear
Gears7 forward and 1 reverse
Transmission model
Transmission typeCollar shift
Gears8 forward and 4 reverse
Tires
Front tires Ag: 5.50-16, 6.00-16
Lawn/turf: 27/9.5-15, 23/10.5-12
Rear tires Ag: 12.2-28, 13.6-28
Lawn/turf: 16.9-24, 16.5L-16
Three-Point Hitch
CategoryI
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO typeLive
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
Hydraulic capacity37.9 L (10 US. gal, 8.3 Imp. gal.)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*