The Massey Ferguson 383 is a 2WD utility tractor from the 300 series. This tractor was manufactured by Massey Ferguson in Coventry, England from 1987 to 1997. The Massey Ferguson 383 is equipped with a 4.1 L (248.0 cu·in) four-cylinder diesel engine and a gear type transmission with 8 forward and 2 reverse gears.
The MF 383 utility tractor used the Perkins A2.248 engine. It is a 4.1 L, 4,064 cm2, (248.0 cu·in) four-cylinder natural aspirated diesel engine with 101.0 mm (3.98 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 82.1 PS (60.4 kW; 81.0 HP) at 2,200 rpm of output power.
The Massey Ferguson 383 is equipped with power steering, wet disc brakes, two-post ROPS, and 107.9 liters (28.5 US gal.; 23.7 Imp. gal) fuel tank.
Massey Ferguson 383 Specifications
General Specifications | |
Model | Massey Ferguson 383 |
Length | 3,660 mm (144.1 in) |
Width | 2,000 mm (78.7 in) |
Height | – |
Wheel base | 2,130 mm (83.9 in) |
Ground clearance | 350 mm (13.8 in) |
Weight | 2,766 kg (6,098 lbs) |
Fuel tank capacity | 107.9 liters (28.5 US gal.; 23.7 Imp. gal) |
Battery | 12V |
Cabin type | Two-post ROPS |
Engine | |
Engine model | Perkins A2.248 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 4.1 L, 4,064 cm2, (248.0 cu·in) |
Bore and stroke | 101.0 mm X 127.0 mm (3.98 in X 5 in) |
Horsepower | 82.1 PS (60.4 kW; 81.0 HP) at 2,200 rpm |
Starter | Electric |
Coolant capacity: | 15.1 L (16 US. qt, 13.3 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Power |
Brakes | Differental wet disc |
Transmission model | – |
Transmission type | Gear type |
Gears | 8 forward and 2 reverse |
Tires | |
Front tires | Ag: 8.5L-15 |
Rear tires | Ag: 18.4-30 |
Three-Point Hitch | |
Category | II |
Control type | – |
Lift capacity (at ends) | 1,930 kg (4,256 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Live |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Pressure | 3000 psi (206.8 bar) |
Valves | 2 |
Pump flow | 4.4 gpm (16.7 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment