John Deere 7410

John Deere 7410The John Deere 7410 is a 2WD or 4WD row-crop tractor from the 7010 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1997 to 2002. The JD 7410 is equipped with a 6.8 L (414.0 cu·in) six-cylinder diesel engine and one of three transmissions: a fully synchronized transmission with 12 forward and 4 reverse gears, a partial power shift transmission with 16 forward and 16 reverse gears or a partial power shift transmission with 20 forward and 20 reverse gears (28 forward and 28 reverse gears with creeper).

The John Deere 7410 row-crop tractor used the John Deere PowerTech 6068 engine. It is a 6.8 L, 6,784 cm2, (414.0 cu·in) six-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 121.7 PS (89.5 kW; 120.0 HP) at 2,100 rpm of output power and 490.9 N·m (50.1 kg·m, 361.8 ft·lb) of torque.

The JD 7410 is equipped with power steering, hydraulic wet disc brakes, ComfortGard cab, and 189.3 liters (50 US gal.; 41.6 Imp. gal) fuel tank.

John Deere 7410 Specifications

General Specifications
ModelJohn Deere 7410
Length4,260 mm (167.7 in)
Width2,430 mm (95.7 in)
Height 2WD Cab: 2,830 mm (111.4 in)
4WD Cab: 2,820 mm (111 in)
Wheel base 2WD: 2,840 mm (111.8 in)
4WD: 2,620 mm (103.1 in)
Ground clearance 2WD: 610 mm (24 in)
4WD: 530 mm (20.9 in)
Weight (shipping) 2WD: 5,210 kg (11,486 lbs)
4WD: 5,600 kg (12,346 lbs)
Fuel tank capacity189.3 liters (50 US gal.; 41.6 Imp. gal)
Battery12V, CCA 925A, Group 31
Cabin typeComfortGard cab
Engine
Engine modelJohn Deere PowerTech 6068
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement6.8 L, 6,784 cm2, (414.0 cu·in)
Bore and stroke106.0 mm X 127.0 mm (4.17 in X 5 in)
Compression ratio17.0:1
Horsepower121.7 PS (89.5 kW; 120 HP) at 2,100 rpm
Torque490.9 N·m (50.1 kg·m, 361.8 ft·lb)
StarterElectric
Oil typeSAE 10W-40, 5W-40, 0W-40
Oil capacity:18.9 L (20 US. qt, 16.6 Imp. qt.)
Coolant capacity:18.9 L (18.5 US. qt, 15.4 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower
BrakesHydraulic wet disc
Final driveInboard planetary
Differential lockElectro-hydraulic
Transmission modelJohn Deere SyncroPlus
Transmission typeFully synchronized with wet disc clutch
Gears12 forward and 4 reverse
Speed Forward: 30.4 kmh (18.9 mph) Reverse: 20.1 kmh (12.5 mph)
Transmission oil capacity 2WD: 56.8 L (15 US. gal, 12.5 Imp. gal.)
4WD: 64.4 L (17 US. gal, 14.2 Imp. gal.)
Transmission modelJohn Deere PowrQuad
Transmission typePartial power shift with wet disc clutch
Gears16 forward and 16 reverse
Speed Forward: 29.6 kmh (18.4 mph) Reverse: 36.0 kmh (22.4 mph)
Transmission oil capacity 2WD: 56.8 L (15 US. gal, 12.5 Imp. gal.)
4WD: 64.4 L (17 US. gal, 14.2 Imp. gal.)
Transmission modelJohn Deere PowrQuad
Transmission typePartial power shift with wet disc clutch
Gears20 forward and 20 reverse
Transmission oil capacity 2WD: 56.8 L (15 US. gal, 12.5 Imp. gal.)
4WD: 64.4 L (17 US. gal, 14.2 Imp. gal.)
Transmission modelJohn Deere PowrQuad Creeper
Transmission typePartial power shift
Gears28 forward and 28 reverse
Transmission oil capacity 2WD: 60.6 L (16 US. gal, 13.3 Imp. gal.)
4WD: 68.1 L (18 US. gal, 15.0 Imp. gal.)
Tires
Front tires Ag: 11.00-16 (2WD), 13.6R28 (4WD)
Rear tires Ag: 18.4-38
Three-Point Hitch
CategoryIII/IIIN
Control type
Lift capacity (at ends) 2WD: 3,360 kg (7,410 lbs)
4WD: 3,805 kg (8,390 lbs)
Front Hitch
CategoryIIIN/II
Lift capacity3,490 kg (7,700 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540/1000 rpm
Hydraulic system
Hydraulic typeClosed center pressure flow compensated (PFC)
Pressure2900 psi (199.9 bar)
Valves2 to 4
Pump flow 16.0 gpm (60.6 lpm)
26.0 gpm (98.4 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*