The John Deere 9620RX is an agricultural crawler from the 9R series. This tractor has been manufactured by John Deere in Waterloo, Iowa, USA since 2016. The John Deere 9620RX is equipped with a 14.9 L (912.0 cu·in) six-cylinder diesel engine and a full power shift transmission with 18 forward and 6 reverse gears.
The John Deere 9620RX agricultural crawler used the Cummins QSX15 engine. It is a 14.9 L, 14,945 cm2, (912.0 cu·in) six-cylinder variable geometry turbocharged diesel engine with 137.0 mm (5.39 in) of the cylinder bore and 169.0 mm (6.65 in) of the piston stroke. This engine produced 628.7 PS (462.3 kW; 620.0 HP) of output power.
John Deere 9620RX Specifications
| General Specifications | |
| Model | John Deere 9620RX |
| Length | 8,170 mm (321.7 in) |
| Width | 30-inch tracks: 2,970 mm (116.9 in) 36-inch tracks: 312 mm (12.3 in) |
| Height (exhaust) | 4,120 mm (162.2 in) |
| Wheel base | – |
| Ground clearance (drawbar) | 400 mm (15.7 in) |
| Weight (shipping) | 25,175 kg (55,501 lbs) |
| Fuel tank capacity | 1515.0 liters (400.2 US gal.; 333.3 Imp. gal) |
| Battery | Four 12V, CCA 925A |
| Cabin type | CommandView III |
| Engine | |
| Engine model | Cummins QSX15 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 14.9 L, 14,945 cm2, (912.0 cu·in) |
| Bore and stroke | 137.0 mm X 169.0 mm (5.39 in X 6.65 in) |
| Horsepower | 628.7 PS (462.3 kW; 620.0 HP) |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | Articulated-crawler |
| Steering type | – |
| Brakes | – |
| Transmission model | e18 PowerShift |
| Transmission type | Full power shift |
| Gears | 18 forward and 6 reverse |
| Tracks | |
| Size | 30-inch track 36-inch track |
| Three-Point Hitch | |
| Category | IV/IVN |
| Control type | |
| Lift capacity | 6,805 kg (15,000 lbs) 9,072 kg (20,000 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with electro-hydraulic clutch |
| Rear PTO speed | 1000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed-center pressure/flow compensated |
| Valves | 4 to 8 |
| Pump flow | 58 gpm (219.6 lpm) 115 gpm (435.3 lpm) |
| SCV flow | 35 gpm (132.5 lpm) 42 gpm (159.0 lpm) |
Be the first to comment