Deutz-Allis 5215

Deutz-Allis 5215The Deutz-Allis 5215 is a 2WD or 4WD compact utility tractor from the 5200 Compact series. This tractor was manufactured by Hinomoto for distributor Deutz-Allis in from 1987 to 1989. The Deutz-Allis 5215 is equipped with a 1.0 L (61.1 cu·in) three-cylinder diesel engine and one of two transmissions: a synchromesh transmission with 9 forward and 3 reverse gears or a hydrostatic transmission with infinite (3-range) forward and reverse gears.

The Deutz-Allis 5215 compact utility tractor used the Toyosha engine. It is a 1.0 L, 1,002 cm2, (61.1 cu·in) three-cylinder natural aspirated diesel engine with 73.0 mm (2.87 in) of the cylinder bore and 80.0 mm (3.15 in) of the piston stroke. The compression ratio rating is 23:1. This engine produced 18.2 PS (13.4 kW; 18.0 HP) at 2,500 rpm of output power.

The Deutz-Allis 5215 is equipped with manual steering, differential mechanical drum brakes, two-post ROPS and 14.0 liters (3.7 US gal.; 3.1 Imp. gal) fuel tank.

Deutz-Allis 5215 Specifications

General Specifications
ModelDeutz-Allis 5215
Length2,730 mm (107.5 in)
Width1,130 mm (44.5 in)
Height (ROPS) 2WD: 1,850 mm (72.8 in)
4WD: 1,840 mm (72.4 in)
Wheel base1,400 mm (55.1 in)
Ground clearance (front axle) 2WD: 320 mm (12.6 in)
4WD: 260 mm (10.2 in)
Weight 2WD Hydro: 690 kg (1,521 lbs)
4WD Hydro: 785 kg (1,731 lbs)
Fuel tank capacity14.0 liters (3.7 US gal.; 3.1 Imp. gal)
Battery
Cabin typeTwo-post ROPS. Optional canopy and soft cab.
Engine
Engine modelToyosha
Engine typeFour-stroke, liquid-cooled, inline
Cylinders3
Fuel typeDiesel
Displacement1.0 L, 1,002 cm2, (61.1 cu·in)
Bore and stroke73.0 mm X 80.0 mm (2.87 in X 3.15 in)
Compression ratio23:1
Horsepower18.2 PS (13.4 kW; 18.0 HP) at 2,500 rpm
StarterElectric
Oil capacity:2.6 L (2.7 US. qt, 2.3 Imp. qt.)
Coolant capacity:3.5 L (3.7 US. qt, 3.1 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD (optional)
Steering typeManual
BrakesDifferential mechanical drum
Transmission model
Transmission typeSynchromesh
Gears9 forward and 3 reverse
Transmission model
Transmission typeHydrostatic
GearsInfinite (3-range) forward and reverse
Speed Forward: 17.1 kmh (10.6 mph) Reverse: kmh (0 mph)
Transmission oil capacity17.0 L (4.5 US. gal, 3.7 Imp. gal.)
Tires
Front tires Ag: 5.00-10 (2WD), 6.00-12 (4WD)
Rear tires Ag: 9.5-16
Three-Point Hitch
CategoryI
Control type
Lift capacity (at ends)550 kg (1213 lbs)
PTO (Power take-off shaft)
Middle PTO typeIndependent
Middle PTO speed2114 rpm
Rear PTO typeIndependent
Rear PTO speed540 rpm
Hydraulic system
Hydraulic type
Hydraulic capacity4.5 L (1.2 US. gal, 1 Imp. gal.)
Valves0 to 2
Total flow3.56 gpm (13.5 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*