The John Deere 7230R is a 4WD row-crop tractor from the 7R series. This tractor has been manufactured by John Deere in Waterloo, Iowa, USA since 2014. The John Deere 7230R is equipped with a 6.8 L (414.0 cu·in) six-cylinder diesel engine and one of three transmissions: a partial power shift transmission with 20 forward and 20 reverse gears, a full powershift transmission with 23 forward and 11 reverse gears, or an infinitely variable transmission with infinite forward and reverse gears.
The JD 7230R row-crop tractor used the John Deere PowerTech PSX engine. It is a 6.8 L, 6,784 cm2, (414.0 cu·in) six-cylinder dual turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 272.8 PS (200.6 kW; 269.0 HP) at 2,100 rpm of output power.
The John Deere 7230R is equipped with hydrostatic power steering, hydraulic wet disc brakes, Cab (standard), and 571.9 liters (151.1 US gal.; 125.8 Imp. gal) fuel tank for the version with the CommandQuad transmission, 544 liters (143.7 US gal.; 119.6 Imp. gal) with e23, or 589 liters (155.6 US gal.; 129.5 Imp. gal) with IVT transmission.
John Deere 7230R Specifications
General Specifications | |
Model | John Deere 7230R |
Length | 5,510 mm (216.9 in) |
Width | – |
Height | – |
Wheel base | 2,920 mm (115 in) |
Ground clearance | Front axle: 490 mm (19.3 in) |
Weight | 10,385 kg (22,895 lbs) |
Fuel tank capacity | With CommandQuad: 572 liters (151.1 US gal.; 125.8 Imp. gal) With E23: 544 liters (143.7 US gal.; 119.6 Imp. gal) With IVT: 589 liters (155.6 US gal.; 129.5 Imp. gal) |
Battery | Two 12V, CCA 925A, Group 31 |
Cabin type | Cab (standard) |
Engine | |
Engine model | John Deere PowerTech PSX |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 6.8 L, 6,784 cm2, (414.0 cu·in) |
Bore and stroke | 106.0 mm X 127.0 mm (4.17 in X 5 in) |
Compression ratio | 16.0:1 |
Horsepower | 272.8 PS (200.6 kW; 269.0 HP) at 2,100 rpm |
Torque | 1076.7 N·m (109.8 kg·m, 793.5 ft·lb) at 1,600 rpm |
Starter | Electric |
Oil type | SAE 0W-40, 15W-40 |
Oil capacity: | 24.5 L (25.9 US. qt, 21.6 Imp. qt.) |
Coolant capacity: | 39.5 L (41.7 US. qt, 34.8 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Hydraulic wet disc |
Final drive | Inboard planetary |
Differential lock | Electro-hydraulic rear |
Transmission model | John Deere CommandQuad Eco |
Transmission type | Partial power shift |
Gears | 20 forward and 20 reverse |
Speed | Forward: 50.5 kmh (31.4 mph) Reverse: 53.0 kmh (32.9 mph) |
Transmission oil capacity | 160.0 L (42.3 US. gal, 35.2 Imp. gal.) |
Transmission model | John Deere e23 |
Transmission type | Full power shift |
Gears | 23 forward and 11 reverse |
Speed | Forward: 50.0 kmh (31.1 mph) Reverse: 29.9 kmh (18.6 mph) |
Transmission oil capacity | 160.0 L (42.3 US. gal, 35.2 Imp. gal.) |
Transmission model | John Deere AutoPowr IVT |
Transmission type | Infinitely variable transmission |
Gears | Infinite forward and reverse |
Speed | Forward: 49.9 kmh (31 mph) Reverse: kmh (0 mph) |
Transmission oil capacity | 160.0 L (42.3 US. gal, 35.2 Imp. gal.) |
Tires | |
Front tires | Ag: 540/65R34 |
Rear tires | Ag: 650/85R38 |
Three-Point Hitch | |
Category | III/IIIN |
Control type | Electro-hydraulic draft sensing |
Lift capacity (at ends) | 5,445 kg (12,000 lbs) Optional: 6,895 kg (15,200 lbs) |
Front Hitch | |
Category | IIIN |
Lift capacity | 5,200 kg (11,465 lbs) |
PTO (Power take-off shaft) | |
Front PTO type | Independent |
Front PTO speed | 1000 (1.375) 1000 (1.75) |
Rear PTO type | Independent |
Rear PTO speed | 1000 (1.75) 540/1000 (1.375) 540E/1000/1000E (1.375) |
Hydraulic system | |
Hydraulic type | Closed center pressure-flow compensated |
Hydraulic capacity | 160.1 L (42.3 US. gal, 35.2 Imp. gal.) |
Pressure | 2958 psi (203.9 bar) |
Valves | 3 to 6 |
Pump flow | 31.9 gpm (120.8 lpm) 42.8 gpm (162.0 lpm) 59.0 gpm (223.3 lpm) |
Rear SCV flow | 34.9 gpm (132.1 lpm) |
Front SCV flow | 33.3 gpm (126.0 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment