Cub Cadet Ex450

Cub Cadet Ex450The Cub Cadet Ex450 is a 4WD compact utility tractor from the Ex series. This tractor was manufactured by Yanmar for distributor Cub Cadet from 2009 to 2011. The Cub Cadet Ex450 is equipped with a 2.2 L (133.6 cu·in) four-cylinder diesel engine and a synchronized shuttle transmission with 9 forward and 9 reverse gears.

The Cub Cadet Ex450 compact utility tractor used the Yanmar engine. It is a 2.2 L, 2,189 cm2, (133.6 cu·in) four-cylinder natural aspirated diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. This engine produced 45.7 PS (33.6 kW; 45.0 HP) at 2,700 rpm of output power.

The Cub Cadet Ex450 is equipped with hydrostatic power steering, wet disc brakes, two-post ROPS, and 42.8 liters (11.3 US gal.; 9.4 Imp. gal) fuel tank.

Following attachments are available for the Cub Cadet Ex450 compact utility tractor:

  • Cub Cadet CL400 loader
  • Cub Cadet CB85 backhoe

Cub Cadet Ex450 Specifications

General Specifications
ModelCub Cadet Ex450
Length3,220 mm (126.8 in)
Width1,820 mm (71.7 in)
Height
Wheel base1,820 mm (71.7 in)
Ground clearance340 mm (13.4 in)
Weight (operating)1,587 kg (3,499 lbs)
Fuel tank capacity42.8 liters (11.3 US gal.; 9.4 Imp. gal)
Battery12V
Cabin typeTwo-post ROPS
Engine
Engine modelYanmar
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement2.2 L, 2,189 cm2, (133.6 cu·in)
Bore and stroke88.0 mm X 90.0 mm (3.46 in X 3.54 in)
Horsepower45.7 PS (33.6 kW; 45.0 HP) at 2,700 rpm
StarterElectric
Oil capacity:5.3 L (5.6 US. qt, 4.7 Imp. qt.)
Coolant capacity:4.4 L (4.6 US. qt, 3.9 Imp. qt.)
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesWet disc
Front axle7.6 L (8.0 US.qts, 6.7 Imp. qts)
Transmission model
Transmission typeSynchronized shuttle
Gears9 forward and 9 reverse
Transmission oil capacity26.5 L (7 US. gal, 5.8 Imp. gal.)
Tires
Front tires Ag: 8-16
Lawn/turf: 27×10.5-15
Industrial: 10-16.5
Rear tires Ag: 14.9-24
Lawn/turf: 44×18-20
Industrial: 17.5-24
Three-Point Hitch
CategoryI
Control typePosition control
Lift capacity (at 610 mm/24 in)1,117 kg (2,463 lbs)
PTO (Power take-off shaft)
Rear PTO typeLive
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
Pump flow8.5 gpm (32.2 lpm)
Steering flow4.5 gpm (17 lpm)
Total flow13.0 gpm (49.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*