John Deere 9520

John Deere 9520The John Deere 9520 is a 4WD four-wheel drive from the 9020 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 2002 to 2007. The JD 9520 is equipped with a 12.5 L (765.0 cu·in) six-cylinder diesel engine and a full power shift transmission with 18 forward and 6 reverse gears.

The JD 9520 four-wheel drive used the John Deere engine. It is a 12.5 L, 12,536 cm2, (765.0 cu·in) six-cylinder turbocharged diesel engine with 127.0 mm (5 in) of the cylinder bore and 156.0 mm (6.14 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 456.4 PS (335.6 kW; 450.0 HP) at 2,100 rpm of output power.

The John Deere 9520 is equipped with hydrostatic articulated steering, hydraulic wet disc brakes, CommandView cab and 1022.0 liters (270 US gal.; 224.8 Imp. gal) fuel tank.

John Deere 9520 Specifications

General Specifications
ModelJohn Deere 9520
Length6,950 mm (273.6 in)
Width2,930 mm (115.4 in)
Height (cab)3,490 mm (137.4 in)
Wheel base3,500 mm (137.8 in)
Ground clearance (front axle)730 mm (28.7 in)
Weight (operating)17,380 kg (38,316 lbs)
Fuel tank capacity1022.0 liters (270 US gal.; 224.8 Imp. gal)
BatteryThree 12V, CCA 925A
Cabin typeCommandView cab standard with air-conditioning
Engine
Engine modelJohn Deere
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement12.5 L, 12,536 cm2, (765.0 cu·in)
Bore and stroke127.0 mm X 156.0 mm (5 in X 6.14 in)
Compression ratio17.0:1
Horsepower456.4 PS (335.6 kW; 450.0 HP) at 2,100 rpm
StarterElectric
Oil capacity:41.6 L (44 US. qt, 36.6 Imp. qt.)
Coolant capacity:60.6 L (64 US. qt, 53.3 Imp. qt.)
Transmission and chassis
Chassis4×4 articulated 4WD
Steering typeHydrostatic articulated
BrakesHydraulic wet disc
Transmission modelJohn Deere Powershift
Transmission typeFull power shift
Gears18 forward and 6 reverse
Speed Forward: 40.1 kmh (24.9 mph) Reverse: 12.7 kmh (7.9 mph)
Transmission oil capacity 134.0 L (35.4 US. gal, 29.5 Imp. gal.)
With PTO: 137.8 L (36.4 US. gal, 30.3 Imp. gal.)
Tires
Front tires Ag: 800/70R38
Rear tires Ag: 800/70R38
Three-Point Hitch
CategoryIII or IV/IVN
Control type
Lift capacity (at ends) 6,290 kg (13,870 lbs)
Optional: 6,550 kg (14,445 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed1,000 rpm
Hydraulic system
Hydraulic typeClosed center pressure/flow compensated
Hydraulic capacity 102.2 L (27.0 US. gal, 22.5 Imp. gal.)
With 3pt: 106.0 L (28.0 US. gal, 23.3 Imp. gal.)
Hi-flow: 113.6 L (30.0 US. gal, 25.0 Imp. gal.)
Hi-flow/3pt: 117.3 L (31.0 US. gal, 25.8 Imp. gal.)
Pressure2900 psi (199.9 bar)
Valves4 or 5
Pump flow30.0 gpm (113.6 lpm)
Total flow 48.0 gpm (181.7 lpm)
Hi-flow: 78.0 gpm (295.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*