The Snapper LT200H48 is a 2WD lawn tractor manufactured by Snapper from 2003 to 2005. The Snapper LT200H48 is equipped with a 0.7 L (40.0 cu·in) two-cylinder gasoline engine and a belt-driven hydrostatic transmission with infinite forward and reverse gears.
The Snapper LT200 lawn tractor used the Briggs & Stratton 40G777 engine. It is a 0.7 L, 655 cm2, (40.0 cu·in) two-cylinder natural aspirated gasoline engine with 75.0 mm (2.95 in) of the cylinder bore and 73.0 mm (2.87 in) of the piston stroke. This engine produced 20.3 PS (14.9 kW; 20.0 HP) of output power.
The Snapper LT200 H48 is equipped with manual steering, dry disc brakes, an open operator station and 7.6 liters (2 US gal.; 1.7 Imp. gal) fuel tank.
Snapper LT200H48 Specifications
| General Specifications | |
| Model | Snapper LT200 H48 |
| Length | 1,670 mm (65.7 in) |
| Width | 1,470 mm (57.9 in) |
| Height | 1,010 mm (39.8 in) |
| Wheel base | 1,240 mm (48.8 in) |
| Weight | 281 kg (619 lbs) |
| Fuel tank capacity | 7.6 liters (2 US gal.; 1.7 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Briggs & Stratton 40G777 |
| Engine type | Four-stroke, air-cooled |
| Cylinders | 2 |
| Fuel type | Gasoline |
| Displacement | 0.7 L, 655 cm2, (40.0 cu·in) |
| Bore and stroke | 75.0 mm X 73.0 mm (2.95 in X 2.87 in) |
| Horsepower | 20.3 PS (14.9 kW; 20.0 HP) |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Manual |
| Brakes | Dry disc |
| Transmission model | Tuff Torq K46 |
| Transmission type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
| Speed | Forward: 10.5 kmh (6.5 mph) Reverse: 8.0 kmh (5.0 mph) |
| Tires | |
| Front tires | Lawn/turf: 15×5.50-6 |
| Rear tires | Lawn/turf: 20×10.00-8 |
| PTO (Power take-off shaft) | |
| Front PTO type | Independent with electric clutch |
| Front PTO speed | – |
Be the first to comment