The John Deere 8360R is a 4WD row-crop tractor from the 8R series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 2011 to 2013. The John Deere 8360R is equipped with a 9.0 L (548.0 cu·in) six-cylinder diesel engine and a infinitely variable transmission (IVT) with infinite forward and reverse gears.
The JD 8360R row-crop tractor used the John Deere PowerTech PSX engine. It is a 9.0 L, 8,980 cm2, (548.0 cu·in) six-cylinder dual turbocharged diesel engine with 118.0 mm (4.65 in) of the cylinder bore and 136.0 mm (5.35 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 365.2 PS (268.5 kW; 360.0 HP) at 2,100 rpm of output power.
The Deere 8360R is equipped with hydrostatic power or ActiveCommand (optional) steering, differential hydraulic wet disc brakes, CommandView II cab (standard) and 695.0 liters (183.6 US gal.; 152.9 Imp. gal) fuel tank.
John Deere 8360R Specifications
| General Specifications | |
| Model | John Deere 8360R |
| Length | 6,190 mm (243.7 in) |
| Width | Axle: 2,430 mm (95.7 in) Long axle: 3,000 mm (118.1 in) |
| Height (cab) | 3,520 mm (138.6 in) |
| Wheel base | 3,020 mm (118.9 in) |
| Ground clearance | Rear axle: 660 mm (26 in) Drawbar: 350 mm (13.8 in) |
| Weight (operating) | 12,345 kg (27,216 lbs) ILS: 13,720 kg (30,247 lbs) |
| Fuel tank capacity | 695.0 liters (183.6 US gal.; 152.9 Imp. gal) |
| Battery | Two 12V, CCA 925A |
| Cabin type | CommandView II cab (standard) |
| Engine | |
| Engine model | John Deere PowerTech PSX |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 9.0 L, 8,980 cm2, (548.0 cu·in) |
| Bore and stroke | 118.0 mm X 136.0 mm (4.65 in X 5.35 in) |
| Compression ratio | 16.0:1 |
| Horsepower | 365.2 PS (268.5 kW; 360.0 HP) at 2,100 rpm |
| Starter | Electric |
| Oil capacity: | 27.9 L (29.5 US. qt, 24.5 Imp. qt.) |
| Coolant capacity: | 41.0 L (43.3 US. qt, 36.1 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power or ActiveCommand Steering (optional) |
| Brakes | Differential hydraulic wet disc |
| Differential lock | Front and rear lock |
| Transmission model | John Deere AutoPowr |
| Transmission type | Infinitely variable transmission (IVT) |
| Gears | Infinite forward and reverse |
| Speed | Forward: 50.0 kmh (31.1 mph) |
| Tires | |
| Front tires | Ag: 420/85R34 |
| Rear tires | Ag: 480/80R50 |
| Three-Point Hitch | |
| Category | IVN/III |
| Control type | – |
| Lift capacity (at 610 mm/24 in) | 2011: 8,300 kg (18,300 lbs) 2012: 8,480 kg (18,700 lbs) |
| Front Hitch | |
| Category | IIIN/II (optional) |
| Lift capacity | 3,990 kg (8,800 lbs) 5,195 kg (11,450 lbs) 5,580 kg (12,300 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 1000 (1-3/4), 1000 (1-3/8), 540 (1-3/8) |
| Hydraulic system | |
| Hydraulic type | Closed center pressure-flow compensated |
| Pressure | 2900 psi (200 bar) |
| Valves | 3 to 5 |
| Pump flow | 35.0 gpm (132.5 lpm) |
| Total flow | 60.0 gpm (227.1 lpm) |
Be the first to comment