The John Deere 6140D is a 4WD utility tractor from the 6D series. This tractor was manufactured by John Deere in Saltillo, Mexico from 2008 to 2016. This first generation was manufactured from 2008 ot 2012. The John Deere 6140D is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and a partially synchronized with power shuttle transmission with 9 forward and 9 reverse gears.
The JD 6140D utility tractor used the John Deere 4045H PowerTech E engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder turbocharged intercooled diesel engine with 107.0 mm (4.21 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 19.0:1. This engine produced 139.8 PS (102.8 kW; 138.0 HP) at 2,100 rpm of output power.
The John Deere 6140D is equipped with hydrostatic power steering, differential mechanical wet disc brakes, folding 2-post ROPS or cab and 157.8 liters (41.7 US gal.; 34.7 Imp. gal) fuel tank.
Following attachments are available for the JD 6140D utility tractor:
- John Deere 563 loader
- John Deere 673 loader
John Deere 6140D Specifications
General Specifications | |
Model | John Deere 6140D |
Length | 4,210 mm (165.7 in) |
Width | 1,820 mm (71.7 in) |
Height (cab) | 2,730 mm (107.5 in) |
Wheel base | 2,340 mm (92.1 in) |
Ground clearance (front axle) | 450 mm (17.7 in) |
Weight (shipping) | ROPS: 3,960 kg (8,730 lbs) Cab: 4,260 kg (9,392 lbs) |
Fuel tank capacity | 157.8 liters (41.7 US gal.; 34.7 Imp. gal) |
Battery | 12V, CCA 925A |
Cabin type | Folding 2-post ROPS or cab |
Engine | |
Engine model | John Deere 4045H PowerTech E |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 4.5 L, 4,523 cm2, (276.0 cu·in) |
Bore and stroke | 107.0 mm X 127.0 mm (4.21 in X 5 in) |
Compression ratio | 19.0:1 |
Horsepower | 139.8 PS (102.8 kW; 138.0 HP) at 2,100 rpm |
Torque | 524.8 N·m (53.5 kg·m, 386.8 ft·lb) at 1,500 rpm |
Starter | Electric |
Oil capacity: | 12.3 L (13 US. qt, 10.8 Imp. qt.) |
Coolant capacity: | 16.5 L (17.4 US. qt, 14.5 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Differential mechanical wet disc |
Transmission model | John Deere PowrReverser |
Transmission type | Partially synchronized with power shuttle |
Gears | 9 forward and 9 reverse |
Speed | Forward: 28.3 kmh (17.6 mph) Reverse: 29.3 kmh (18.2 mph) |
Tires | |
Front tires | Ag: 14.9-24 |
Rear tires | Ag: 18.4-34 |
Three-Point Hitch | |
Category | II |
Control type | Mechanical lower link |
Lift capacity (at 610 mm/24 in) | 3,085 kg (6,800 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent with dry disc clutch |
Rear PTO speed | 540/1000 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Hydraulic capacity | 57.9 L (15.3 US. gal, 12.7 Imp. gal.) |
Pressure | 2830 psi (195.1 bar) |
Valves | 2 to 3 |
Pump flow | 17.6 gpm (66.6 lpm) |
Steering flow | 6.9 gpm (26.1 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment