John Deere 3150

John Deere 3150The John Deere 3150 is a 4WD utility tractor manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1985 to 1987. The John Deere 3150 is equipped with a 5.9 L (359.0 cu·in) six-cylinder diesel engine and a two-speed power shift transmission with 16 forward and 8 reverse gears.

The JD 3150 utility tractor used the John Deere engine. It is a 5.9 L, 5,883 cm2, (359.0 cu·in) six-cylinder natural aspirated diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.8:1. This engine produced 96.3 PS (70.8 kW; 95.0 HP) at 2,400 rpm of PTO output power.

The John Deere 3150 is equipped with power steering, hydraulic wet disc brakes, ROPS or Cab (optional) and 134.0 liters (35.4 US gal.; 29.5 Imp. gal) fuel tank.

John Deere 3150 Specifications

General Specifications
ModelJohn Deere 3150
Length–
Width–
Height–
Wheel base2,580 mm (101.6 in)
Weight (operating)5,338 kg (11,768 lbs)
Fuel tank capacity134.0 liters (35.4 US gal.; 29.5 Imp. gal)
Battery12V, CCA 610A
Cabin typeROPS or Cab (optional)
Engine
Engine modelJohn Deere
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement5.9 L, 5,883 cm2, (359.0 cu·in)
Bore and stroke106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Compression ratio17.8:1
Horsepower96.3 PS (70.8 kW; 95.0 HP) at 2,400 rpm
StarterElectric
Coolant capacity:17.0 L (18 US. qt, 15 Imp. qt.)
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typePower
BrakesHydraulic wet disc
Transmission modelTop Shaft Synchronized (TSS) Hi-Lo
Transmission typeTwo-speed power shift
Gears16 forward and 8 reverse
Speed Forward: 30.6 kmh (19.0 mph) Reverse: 13.7 kmh (8.5 mph)
Tires
Front tires Ag: 13.6-28
Rear tires Ag: 18.4-38
Three-Point Hitch
CategoryII
Control type–
Lift capacity2857 kg (6300 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540/1000 rpm
Hydraulic system
Hydraulic typeClosed center
Hydraulic capacity46.9 L (12.4 US. gal, 10.3 Imp. gal.)
Valves2
Pump flow22.0 gpm (83.3 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*