The John Deere 9570RX is a agricultural crawler from the 9R series. This tractor has been manufactured by John Deere in Waterloo, Iowa, USA from 2016. The John Deere 9570RX is equipped with a 14.9 L (912.0 cu·in) six-cylinder diesel engine and a full power shift transmission with 18 forward and 6 reverse gears.
The JD 9570RX agricultural crawler used the Cummins QSX15 engine. It is a 14.9 L, 14,945 cm2, (912.0 cu·in) six-cylinder variable geometry turbocharged diesel engine with 137.0 mm (5.39 in) of the cylinder bore and 169.0 mm (6.65 in) of the piston stroke. This engine produced 578 PS (425.0 kW; 570.0 HP) of output power.
The John Deere 9570RX is equipped with CommandView III cab standard and 1514.0 liters (400 US gal.; 333 Imp. gal) fuel tank.
John Deere 9570RX Specifications
| General Specifications | |
| Model | John Deere 9570RX |
| Length | 8,170 mm (321.7 in) |
| Width | 30-in tracks: 2,970 mm (116.9 in) 36-in tracks: 3,120 mm (122.8 in) |
| Height (exhaust) | 4,120 mm (162.2 in) |
| Wheel base | 4,150 mm (163.4 in) |
| Ground clearance (drawbar) | 400 mm (15.7 in) |
| Weight (shipping) | 25,175 kg (55,501 lbs) |
| Fuel tank capacity | 1514.0 liters (400 US gal.; 333 Imp. gal) |
| Battery | Four 12V, CCA 925A |
| Cabin type | CommandView III cab standard |
| Engine | |
| Engine model | Cummins QSX15 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 14.9 L, 14,945 cm2, (912.0 cu·in) |
| Bore and stroke | 137.0 mm X 169.0 mm (5.39 in X 6.65 in) |
| Horsepower | 578 PS (425.0 kW; 570.0 HP) |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | Articulated-crawler |
| Steering type | – |
| Brakes | – |
| Transmission model | e18 PowerShift |
| Transmission type | Full power shift |
| Gears | 18 forward and 6 reverse |
| Tracks | |
| Width | 760 mm (30 in) |
| Width | 910 mm (36 in) |
| Three-Point Hitch | |
| Category | IV/IVN (optional) |
| Control type | – |
| Lift capacity | 6,805 kg (15,000 lbs) 9,070 kg (20,000 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with electro-hydraulic clutch (optional) |
| Rear PTO speed | 1000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed-center pressure/flow compensated |
| Valves | 4 to 8 |
| Pump flow | 58.0 gpm (219.6 lpm) 115.0 gpm (435.3 lpm) |
| SCV flow | 35.0 gpm (132.5 lpm) 42.0 gpm (159.0 lpm) |
Be the first to comment