The John Deere 9460R is a 4WD four-wheel drive tractor from the 9R/RT series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 2012 to 2014. The John Deere 9460R is equipped with a 13.5 L (826.7 cu·in) six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 24 forward and 6 reverse gears or a full power shift transmission with 18 forward and 6 reverse gears.
The JD 9460R four-wheel drive used the John Deere PowerTech PSX engine. It is a 13.5 L, 13,547 cm2, (826.7 cu·in) six-cylinder turbocharged diesel engine with 132.0 mm (5.2 in) of the cylinder bore and 165.0 mm (6.5 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 466.5 PS (343.0 kW; 460.0 HP) at 2,100 rpm of output power.
The John Deere 9460R is equipped with hydrostatic power steering, hydraulic wet disc brakes, CommandView II cab (standard) with air-conditioning and 1324.8 liters (350 US gal.; 291.4 Imp. gal) fuel tank.
John Deere 9460R Specifications
General Specifications | |
Model | John Deere 9460R |
Length | 7,160 mm (281.9 in) |
Width | 3,040 mm (119.7 in) |
Height | 3,680 mm (144.9 in) |
Wheel base | 3,500 mm (137.8 in) |
Weight (operating) | 18,920 kg (41,711 lbs) |
Fuel tank capacity | 1324.8 liters (350 US gal.; 291.4 Imp. gal) |
Battery | Three 12V, CCA 925A |
Cabin type | CommandView II cab (standard) with air-conditioning |
Engine | |
Engine model | John Deere PowerTech PSX |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 13.5 L, 13,547 cm2, (826.7 cu·in) |
Bore and stroke | 132.0 mm X 165.0 mm (5.2 in X 6.5 in) |
Compression ratio | 16.0:1 |
Horsepower | 466.5 PS (343.0 kW; 460.0 HP) at 2,100 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×4 articulated 4WD |
Steering type | Hydrostatic power |
Brakes | Hydraulic wet disc |
Final drive | Inboard planetary |
Differential lock | Fully-locking electro-hydraulic |
Transmission model | John Deere PowrSync |
Transmission type | Partial power shift with hydraulic wet disc clutch |
Gears | 24 forward and 6 reverse |
Speed | Forward: 38.6 kmh (24 mph) Reverse: 12.3 kmh (7.6 mph) |
Transmission model | John Deere PowerShift |
Transmission type | Full power shift with hydraulic wet disc clutch |
Gears | 18 forward and 6 reverse |
Speed | Forward: 42.7 kmh (26.5 mph) Reverse: 13.5 kmh (8.4 mph) |
Tires | |
Front tires | Ag: 710/70R42 |
Rear tires | Ag: 710/70R42 |
Three-Point Hitch | |
Category | IVN/IV, IVN/III |
Control type | Electronic draft sensing |
Lift capacity | 6,940 kg (15,303 lbs) Optional: 9,070 kg (20,000 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent (optional) |
Rear PTO speed | 1000 (1.75) rpm |
Hydraulic system | |
Hydraulic type | Closed center pressure flow compensated (PFC) |
Pressure | 2900 psi (199.9 bar) |
Valves | 4 to 6 |
Pump flow | 44.0 gpm (166.6 lpm) PowerShift: 48.0 gpm (181.7 lpm) High-Flow: 78.0 gpm (295.3 lpm) |
SCV flow | 37.0 gpm (140.0 lpm) 19.1mm SCV: 45.0 gpm (170.3 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment