The CaseIH 8940 Magnum is a 2WD/4WD row-crop tractor from the Magnum 8900 series. This tractor was manufactured by CaseIH in Racine, Wisconsin, USA from 1997 to 1998. The CaseIH 8940 is equipped with a 8.3 L (504.5 cu·in) six-cylinder diesel engine and a full power shift transmission with 18 forward and 4 reverse gears (24 forward and 6 reverse gears with creeper).
The Case International 8940 row-crop tractor used the CDC engine. It is a 8.3 L, 8,267 cm2, (504.5 cu·in) six-cylinder turbocharged intercooled diesel engine with 114.0 mm (4.49 in) of the cylinder bore and 135.0 mm (5.31 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 207.9 PS (152.9 kW; 205.0 HP) at 2,200 rpm of PTO output power.
The CaseIH 8940 is equipped with power steering, differential hydraulic wet disc brakes, cab (standard) with air-conditioning and 442.8 liters (117 US gal.; 97.4 Imp. gal) fuel tank.
CaseIH 8940 Specifications
General Specifications | |
Model | CaseIH 8940 Magnum |
Length | – |
Width | – |
Height | – |
Wheel base | 3,000 mm (118.1 in) |
Ground clearance (front axle) | 2WD: 570 mm (22.4 in) 4WD: 440 mm (17.3 in) |
Weight (shipping) | 2WD: 7,180 kg (15,829 lbs) 4WD: 7,640 kg (16,843 lbs) |
Fuel tank capacity | 442.8 liters (117 US gal.; 97.4 Imp. gal) |
Battery | Two 12V, CCA 950A |
Cabin type | Cab (standard) with air-conditioning |
Engine | |
Engine model | CDC |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 8.3 L, 8,267 cm2, (504.5 cu·in) |
Bore and stroke | 114.0 mm X 135.0 mm (4.49 in X 5.31 in) |
Compression ratio | 16.5:1 |
Horsepower | 207.9 PS (152.9 kW; 205.0 HP) at 2,200 rpm |
Starter | Electric |
Oil capacity: | 20.8 L (22 US. qt, 18.3 Imp. qt.) |
Coolant capacity: | 29.3 L (31 US. qt, 25.8 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Differential hydraulic wet disc |
Differential lock | Electric rear |
Transmission model | – |
Transmission type | Full power shift with hydraulic wet disc clutch |
Gears | 18 forward and 4 reverse |
Speed | Forward: 32.8 kmh (20.4 mph) Reverse: 11.9 kmh (7.4 mph) |
Tires | |
Front tires | Ag: 14L-16.1 |
Rear tires | Ag: 18.4R-42 |
Three-Point Hitch | |
Category | III/IIIN |
Control type | Electronic lower-link draft sensing |
Lift capacity | 6,240 kg (13,760 lbs) Optional: 7,257 kg (16,000 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent with electro-hydraulic clutch |
Rear PTO speed | 1000 (1.75) |
Hydraulic system | |
Hydraulic type | Closed center pressure-flow compensated (PFC) |
Hydraulic capacity | 172.2 L (45.5 US. gal, 37.9 Imp. gal.) |
Pressure | 2200 psi (151.7 bar) |
Valves | 2 to 4 |
Pump flow | 29.0 gpm (109.8 lpm) |
SCV flow | 27.0 gpm (102.2 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment