The Ford 5900 is a 2WD utility tractor manufactured by Ford from 1985 to 1993. The Ford 5900 is equipped with a 4.2 L (256.0 cu·in) four-cylinder diesel engine and a sliding gear transmission with 8 forward and 2 reverse gears.
The Ford 5900 utility tractor used the Ford engine. It is a 4.2 L, 4,195 cm2, (256.0 cu·in) four-cylinder natural aspirated diesel engine with 112.0 mm (4.41 in) of the cylinder bore and 107.0 mm (4.21 in) of the piston stroke. The compression ratio rating is 16.3:1. This engine produced 74.0 PS (54.4 kW; 73.0 HP) at 2,100 rpm of output power.
The Ford 5900 is equipped with power steering, two-post fixed ROPS and 75.7 liters (20.0 US gal.; 16.7 Imp. gal) fuel tank.
Ford 5900 Specifications
General Specifications | |
Model | Ford 5900 |
Length | 3,700 mm (145.7 in) |
Width | 1,950 mm (76.8 in) |
Height (ROPS) | 2,380 mm (93.7 in) |
Wheel base | 2,220 mm (87.4 in) |
Ground clearance | Front axle: 450 mm (17.7 in) Rear axle: 430 mm (16.9 in) |
Weight | 2,612 kg (5,758 lbs) |
Fuel tank capacity | 75.7 liters (20 US gal.; 16.7 Imp. gal) |
Battery | 12V, 128Ah |
Cabin type | Two-post fixed ROPS |
Engine | |
Engine model | Ford |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 4.2 L, 4,195 cm2, (256.0 cu·in) |
Bore and stroke | 112.0 mm X 107.0 mm (4.41 in X 4.21 in) |
Compression ratio | 16.3:1 |
Horsepower | 74.0 PS (54.4 kW; 73.0 HP) at 2,100 rpm |
Starter | Electric |
Oil capacity: | 8.5 L (9 US. qt, 7.5 Imp. qt.) |
Coolant capacity: | 12.8 L (13.5 US. qt, 11.3 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Power |
Brakes | – |
Differential lock | Mechanical rear |
Transmission model | – |
Transmission type | Sliding gear with dry disc clutch |
Gears | 8 forward and 2 reverse |
Speed | Forward: 23.3 kmh (14.5 mph) Reverse: 11.3 kmh (7 mph) |
Transmission oil capacity | 53.0 L (14 US. gal, 11.7 Imp. gal.) |
Tires | |
Front tires | Ag: 7.50-16 |
Rear tires | Ag: 16.9-30 |
Three-Point Hitch | |
Category | II |
Control type | – |
Lift capacity | 1,515 kg (3,340 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Hydraulic capacity | 53.0 L (14 US. gal, 11.7 Imp. gal.) |
Valves | 1 |
Pump flow | 6.0 gpm (22.7 lpm) |
Steering flow | 3.6 gpm (13.6 lpm) |
Total flow | 9.6 gpm (36.3 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment