The AGCO DT200A is a 4WD row-crop tractor from the DT series. This tractor was manufactured by the AGCO in Beauvais, France from 2005 to 2008. The AGCO DT200A is equipped with 7.4 L diesel engine and continuously variable transmission with infinite (two-range) forward and reverse gears
The AGCO DT200A row-crop tractor used the Sisu diesel engine. it is a 7.4 L, 7,358 cm2, (449 cu·in) six-cylinder turbocharged diesel engine with intercooler. This engine has 108.0 mm (4.25 in) of the cylinder bore and 134.0 mm (5.28 in) of the piston stroke. The compression ratio rating is 17.5:1. This engine produced 238.3 PS (175.2 kW; 235 HP) at 2,200 rpm of maximum output power.
The AGCO DT200A is equipped with hydrostatic power steering, hydraulic wet disc brakes, cabin with optional pneumatic suspension and 600.0 liters (158.5 US gal.; 132 Imp. gal) fuel tank.
AGCO DT200A Specifications
| General Specifications | |
| Model | AGCO DT200A |
| Length | 5,230 mm (205.9 in) |
| Width | – |
| Height | 3,090 mm (121.7 in) |
| Wheel base | 3,070 mm (120.9 in) |
| Weight | 8,680 kg (19,136 lbs) |
| Fuel tank capacity | 600.0 liters (158.5 US gal.; 132 Imp. gal) |
| Battery | 12V |
| Cabin type | Cab with optional pneumatic suspension |
| Engine | |
| Engine model | Sisu Diesel |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 7.4 L, 7,358 cm2, (449 cu·in) |
| Bore and stroke | 108.0 mm X 134.0 mm (4.25 in X 5.28 in) |
| Compression ratio | 17.5:1 |
| Horsepower | 238.3 PS (175.2 kW; 235 HP) at 2,200 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Hydraulic wet disc |
| Transmission model | PowerMaxx CVT |
| Transmission type | Continuously variable transmission |
| Gears | Infinite (two-range) forward and reverse |
| Speed | Forward: 40.2 kmh (25 mph) Reverse: 19.3 (12 mph) |
| Tires | |
| Front tires | – |
| Rear tires | – |
| Three-Point Hitch | |
| Caterogy | III |
| Control type | – |
| Lift capacity | 6,530 kg (14,400 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO spped | 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center pressure flow compensated (PFC) |
| Pressure | 2900 psi (199.9 bar) |
| Valves | 4 or 5 |
| Pump flow | 39.0 gpm (147.6 lpm) |
Be the first to comment