The Cub Cadet XT1 LT50 is a 2WD lawn tractor from the XT1 Enduro Series. This tractor has been manufactured by the Cub Cadet (a part of MTD) since 2015. The Cub Cadet XT1 LT50 is equipped with 0.7 L V-Twin gasoline engine and belt-driven hydrostatic transmission with infinite forward and reverse gears.
The Cub Cadet XT1 LT50 lawn tractor used the Kohler KT735 engine. It is a 0.7 L, 725 cm2, (44.2 cu·in) V-Twin gasoline engine with 84.0 mm (3.31 in) of cylinder bore and 67.0 mm (2.64 in) of piston stroke. The compression ratio rating is 9.1:1. The Kohler KT735 engine produced 24.3 PS (17.9 kW; 24.0 HP) at 3,600 rpm of maximum horsepower.
The Cub Cadet XT1 LT50 is equipped with manual steering, disc brakes, open operator station. and 11.4 liters (3 US gal.; 2.5 Imp. gal) fuel tank.
Following attachments are available for Cub Cadet XT1 LT50 lawn tractor:
- Mid-mount Cub Cadet 50 inch (1,270 mm) mower deck with three-blades and spring-assisted manual lift
- Front-mount Cub Cadet 46 inch (1,160 mm) blade
- Front-mount Cub Cadet 42 inch (1,060 mm) three-stage snowblower
Cub Cadet XT1 LT50 Specifications
| General Specifications | |
| Model | Cub Cadet XT1 LT50 |
| Length | 1,720 mm (67.7 in) |
| Width | – |
| Height | 1,070 mm (42.1 in) |
| Wheel base | 1,190 mm (46.9 in) |
| Weight | 226 kg (498.2 lbs) |
| Fuel tank capacity | 11.4 liters (3 US gal.; 2.5 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station. |
| Engine | |
| Engine model | Kohler KT735 |
| Engine type | Four-stroke, air-cooled, V-twin |
| Cylinders | 2 |
| Fuel type | Gasoline |
| Displacement | 0.7 L, 725 cm2, (44.2 cu·in) |
| Bore and stroke | 84.0 mm X 67.0 mm (3.31 in X 2.64 in) |
| Compression ratio | 9.1:1 |
| Horsepower | 24.3 PS (17.9 kW; 24 HP) at 3,600 rpm |
| Starter | Electric |
| Oil type | SAE 10W-30, API: SJ |
| Oil capacity: | 1.9 L (2.01 US. qt, 1.67 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Manual |
| Brakes | Disc |
| Transmission model | Tuff Torq K46 |
| Transmission type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
| Speed | Forward: 8.8 kmh (5.5 mph) Reverse: 5.0 (3.1 mph) |
| Tires | |
| Front tires | Lawn/turf: 15×6 |
| Rear tires | Lawn/turf: 20×8 |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with manual clutch |
| Rear PTO spped | – |
Be the first to comment