The Kubota B1220D is a 4WD compact utility tractor manufactured by the Kubota. The Kubota B1220D is equipped with a 0.5 L two-cylinder diesel engine and gear shift transmission with dry single-plate type clutch (6 forward and 2 reverse gears).
The Kubota B1220D utility tractor used the Kubota Z482-D25 engine. It is a 0.5 L, 479 cm2, (29.2 cu·in) two-cylinder natural aspirated diesel engine with 67.0 mm (2.64 in) of the cylinder bore and 68.0 mm (2.68 in) of the piston stroke. This engine produced 12 PS (8.8 kW; 11.8 HP) at 3,100 rpm of gross output power and 9.5 PS (7.0 KW; 9.4 HP) of PTO horsepower.
The Kubota B1220D is equipped with manual steering, wet disc type brakes, open operator station and 14.0 liters (3.7 US gal.; 3.1 Imp. gal) fuel tank.
Kubota B1220D Specifications
General Specifications | |
Model | Kubota B1220D |
Length | 2,360 mm (92.9 in) |
Width | 932 mm (36.7 in) |
Height | 1,235 mm (48.6 in) |
Wheel base | 1,270 mm (50 in) |
Weight | 460 kg (1,014 lbs) |
Fuel tank capacity | 14.0 liters (3.7 US gal.; 3.1 Imp. gal) |
Battery | 12V CCA: 400A |
Cabin type | Open operator station |
Engine | |
Engine model | Kubota Z482-D25 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 2 |
Fuel type | Diesel |
Displacement | 0.5 L, 479 cm2, (29.3 cu·in) |
Bore and stroke | 67.0 mm X 68.0 mm (2.64 in X 2.68 in) |
Horsepower | 12 PS (8.8 kW; 11.8 HP) at 3,100 rpm |
Torque | 27.7 N·m (2.8 kg·m, 20.4 ft·lb) |
Starter | Electric |
Oil capacity: | 1.6 L (1.69 US. qt, 1.41 Imp. qt.) |
Coolant capacity: | 3.4 L (3.59 US. qt, 2.99 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Manual |
Brakes | Wet disc type |
Transmission model | – |
Transmission type | Gear shift with dry single plate type clutch |
Gears | 6 forward and 2 reverse |
Speed | Forward: 15.1 kmh (9.4 mph) Reverse: 6.2 (3.9 mph) |
Transmission oil capacity | 10.5 L (11.1 US. qt, 9.24 Imp. qt.) |
Tires | |
Front tires | Ag: 4.5-10 |
Rear tires | Ag: 7-16 |
Three-Point Hitch | |
Caterogy | I |
Control type | Up and down type control valve |
Lift capacity | 430 kg (948 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | – |
Rear PTO spped | 540/1000 rpm |
Hydraulic system | |
Hydraulic type | – |
Hydraulic capacity | 10.5 L (11.1 US. qt, 9.24 Imp. qt.) |
Pump flow | 3.72 gpm (14.1 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment