The John Deere 755 is a 2WD or 4WD compact utility tractor manufactured by John Deere in Horicon, Wisconsin, USA and Augusta, Georgia, USA from 1986 to 1998. The John Deere 755 is equipped with a 0.9 L three-cylinder diesel engine and hydrostatic type transmission with infinite (2-range) forward and reverse gears.
The JD 755 compact utility tractor used the 3TNA72UJ engine. It is a 0.9 L, 879 cm2, (53.6 cu·in) three-cylinder natural aspirated diesel engine with 72.0 mm (2.83 in) of the cylinder bore and 72.0 mm (2.83 in) of the piston stroke. The compression ratio rating is 22.3:1. This engine produced 20.3 PS (14.9 kW; 20.0 HP) at 3,200 rpm of maximum output power.
The John Deere 755 is equipped with hydraulic power steering, differential hydraulic wet disc brakes, open operator station with two-post ROPS and 16.7 liters (4.4 US gal.; 3.7 Imp. gal) fuel tank.
Following attachments are available for JD 755 utility tractor:
- John Deere mid-mount 60 in (1,520 mm) mower deck with 3-blades
- John Deere 70 loader
- John Deere 7 backhoe
John Deere 755 Specifications
General Specifications | |
Model | John Deere 755 |
Length | 2,620 mm (103.1 in) |
Width | 1,300 mm (51.2 in) |
Height | 1,900 mm (74.8 in) |
Wheel base | 1,440 mm (56.7 in) |
Weight | 2WD: 750 kg (1,653 lbs) 4WD: 810 kg (1,780 lbs) |
Fuel tank capacity | 16.7 liters (4.4 US gal.; 3.7 Imp. gal) |
Battery | 12V CCA: 241A |
Cabin type | Open operator station with two-post ROPS |
Engine | |
Engine model | 3TNA72UJ |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 0.9 L, 879 cm2, (53.6 cu·in) |
Bore and stroke | 72.0 mm X 72.0 mm (2.83 in X 2.83 in) |
Compression ratio | 22.3:1 |
Horsepower | 20.3 PS (14.9 kW; 20.0 HP) at 3,200 rpm |
Starter | Electric |
Oil type | SAE 10W-30, API CE or CD |
Oil capacity: | 2.7 L (2.85 US. qt, 2.38 Imp. qt.) |
Coolant capacity: | 3.8 L (4.02 US. qt, 3.34 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Hydraulic power |
Brakes | Differential hydraulic wet disc |
Transmission model | Sunstrand Series 17 |
Transmission type | Hydrostatic type |
Gears | Infinite (2-range) forward and reverse |
Speed | Forward: 17.1 kmh (10.6 mph) Reverse: 8.5 (5.3 mph) |
Transmission oil capacity | 17.0 L (17.96 US. qt, 14.96 Imp. qt.) |
Tires | |
Front tires | 2WD: Ag: 4.00×15 Lawn/turf 23×8.50-12 4WD: Ag: 6-12 Lawn/turf 23×8.50-12 |
Rear tires | 2WD: Ag: 8.3×16 Lawn/turf 31×12.50-15, 31×15.50-15, 33×12.50-15 4WD: Ag: 9.5×16 Lawn/turf 33×12.50-15 |
Three-Point Hitch | |
Caterogy | I |
Control type | – |
Lift capacity | 356 kg (785 lbs) |
PTO (Power take-off shaft) | |
Middle PTO type | Independent |
Middle PTO spped | 2,100 rpm |
Rear PTO type | Independent |
Rear PTO spped | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Hydraulic capacity | 17.0 L (17.96 US. qt, 14.96 Imp. qt.) |
Pressure | 2050 psi (141.3 bar) |
Total flow | 4.0 gpm (15.1 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment