The Mahindra 4540 is a 2WD or 4WD utility tractor from the 4500 series. This tractor has been manufactured by the Mahindra since 2014. The Mahindra 4540 is equipped with a 2.7 L four-cylinder diesel engine and gear type transmission with dry disc clutch and 8 forward and 2 reverse gears.
The Mahindra 4540 utility tractor used the Mahindra engine. It is a 2.7 L, 2,732 cm2, (166.7 cu·in) four-cylinder natural aspirated diesel engine with 89.0 mm (3.5 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. It is a Tier IV, direct injection motor with 18.7:1 of compression ratio rating. This engine produced 41.6 PS (30.6 kW; 41 HP) at 2,300 rpm of max horsepower.
The Mahindra 4540 is equipped with hydrostatic power steering, dry disc brakes, open operator station with two-post ROPS and 55.0 liters (14.5 US gal.; 12.1 Imp. gal) fuel tank.
Following attachments are available for Mahindra 4540 utility tractor:
- Mahindra 4550-2L loader
- Mahindra 4550-4L loader
- Mahindra 4550B backhoe
Mahindra 4540 Specifications
General Specifications | |
Model | Mahindra 4540 |
Length | 2WD: 2,920 mm (115 in) 4WD: 3,270 mm (129 in) |
Width | 2WD: 1,760 mm (69.3 in) 4WD: 2,090 mm (82.6 in) |
Height | 2WD: 2,230 mm (87.8 in) 4WD: 2,350 mm (92.6 in) |
Wheel base | – |
Weight | 2WD: 1,900 kg (4,189 lbs) 4WD: 2,355 kg (5,192 lbs) |
Fuel tank capacity | 55.0 liters (14.5 US gal.; 12.1 Imp. gal) |
Battery | 12V, 96Ah |
Cabin type | Open operator station with two-post ROPS |
Engine | |
Engine model | Mahindra |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 2.7 L, 2,732 cm2, (166.7 cu·in) |
Bore and stroke | 89.0 mm X 110.0 mm (3.5 in X 4.33 in) |
Compression ratio | 18.7:1 |
Horsepower | 41.6 PS (30.6 kW; 41 HP) at 2,300 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Dry disc |
Transmission model | – |
Transmission type | Gear type with dry disc clutch |
Gears | 8 forward and 2 reverse |
Tires | |
Front tires | Ag: 6×16 (2WD), 9.5×16 (4WD) Industrial: 12.6×16.5 |
Rear tires | Ag: 12.4×28 Industrial: 16.9×24 |
Three-Point Hitch | |
Caterogy | II/I |
Control type | Position and draft control |
Lift capacity | 1,600 kg (3,528 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Live with dual-stage clutch |
Rear PTO spped | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Valves | 0 or 1 |
Total flow | 8.7 gpm (32.9 lpm) |
Steering flow | 5.8 gpm (22 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment