The Kubota L225 is a 2WD (L225) or 4WD (L225DT) compact utility tractor from the L series. This tractor was manufactured by the Kubota from 1974 to 1976. The Kubota L225 is equipped with a 1.1 L three-cylinder diesel engine and gear shift transmission with dry type clutch with 8 forward and 2 reverse gears.
The Kubota L225 compact utility tractor used the Kubota D1100A engine. It is a 1.1 L, 1119 cm2, (68.3 cu·in) three-cylinder natural aspirated diesel engine with 76.0 mm (2.99 in) of the cylinder bore and 82.0 mm (3.23 in) of the piston stroke. This engine produced 24.3 PS (17.9 kW; 24.0 HP) at 2,700 rpm of output power. The compression ratio rating is 21.0:1.
The Kubota L225 is equipped with manual steering, differential mechanical expanding shoe brakes and open operator station.
Kubota L225 Specifications
General Specifications | |
Model | Kubota L225 |
Length | – |
Width | – |
Height | – |
Wheel base | 1,530 mm (60.2 in) |
Weight | 905 kg (1,995 lbs) |
Fuel tank capacity | – |
Battery | 12V |
Cabin type | Open operator station |
Engine | |
Engine model | Kubota D1100A |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 1.1 L, 1,119 cm2, (68.3 cu·in) |
Bore and stroke | 76.0 mm X 82.0 mm (2.99 in X 3.23 in) |
Compression ratio | 21.0:1 |
Horsepower | 24.3 PS (17.9 kW; 24.0 HP) at 2,700 rpm |
Starter | Electric |
Oil capacity: | 5.3 L (5.6 US. qt, 4.66 Imp. qt.) |
Coolant capacity: | 6.8 L (7.19 US. qt, 5.98 Imp. qt.) |
Intake / Exhaust valve clearance (cold): | 0.20 mm (0.008 in) |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Manual |
Brakes | Differential mechanical expanding shoe |
Front axle | 0.9 L (0.95 US .qts., 0.79 Imp. qts.) |
Front diff | 1.0 L (1.06 US. qts., 0.88 Imp. qts.) |
Transmission model | – |
Transmission type | Gear shift with dry type clutch |
Gears | 8 forward and 2 reverse |
Speed | Forward: 21.1 kmh (13.1 mph) Reverse: 14.5 (9 mph) |
Transmission oil capacity | 22.0 L (5.8 US. gal, 4.8 Imp. gal.) |
Tires | |
Front tires | Ag: 4.00-15 |
Rear tires | Ag: 9.5-24 |
Three-Point Hitch | |
Caterogy | I |
Control type | – |
Lift capacity | – |
PTO (Power take-off shaft) | |
Rear PTO type | – |
Rear PTO spped | 540/1000 rpm |
Hydraulic system | |
Hydraulic type | – |
Pressure | 1700 psi (117.2 bar) |
Total flow | 3.7 gpm (14 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment