The Kubota MX5200 is a 2WD or 4WD utility tractor from the MX series. This tractor has been manufactured by the Kubota since 2014. The Kubota MX5200 is equipped with a 2.4 L four-cylinder turbocharged diesel engine and hydrostatic transmission with infinite (3-range) forward and reverse gears.
The Kubota MX5200 utility tractor used the Kubota V2403-CR-TE4 engine. It is a 2.4 L, 2,434 cm2, (148.5 cu·in) four-cylinder turbocharged diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 102.4 mm (4.03 in) of the piston stroke. This engine produced 52.9 PS (38.9 kW; 52.2 HP) at 2,700 rpm of net horsepower for gear type version and 52.2 PS (38.4 KW; 51.5 HP) at 2,700 rpm of net horsepower for hydro type version.
The Kubota MX5200 is equipped with hydrostatic power steering, mechanical, Wet disk type brakes, open operator station with two-post ROPS and 51.0 liters (13.5 US gal.; 11.2 Imp. gal) fuel tank.
Following attachments are available for the Kubota MX5200 utility tractor:
- Kubota LA1065 loader
- Kubota BH92 backhoe
Kubota MX5200 Specifications
General Specifications | |
Model | Kubota MX5200 |
Length | 2WD: 3,245 mm (127.8 in) 4WD: 3,180 mm (125.2 in) |
Width | 1,770 mm (69.7 in) |
Height | 2,430 mm (95.7 in) |
Wheel base | 1,895 mm (74.6 in) |
Weight | 2WD with gear trans: 1,576 kg (3,474 lbs) 4WD with gear trans (MX5200DT): 1,686 kg (3,717 lbs) 4WD with hydro trans (MX5200HST): 1,694 kg (3,734 lbs) |
Fuel tank capacity | 51.0 liters (13.5 US gal.; 11.2 Imp. gal) |
Battery | 12V, CCA: 600A |
Cabin type | Open operator station with two-post ROPS |
Engine | |
Engine model | Kubota V2403-CR-TE4 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 2.4 L, 2,434 cm2, (148.5 cu·in) |
Bore and stroke | 87.0 mm X 102.4 mm (3.43 in X 4.03 in) |
Horsepower | Gear trans: 52.9 PS (38.9 kW; 52.2 HP) at 2,700 rpm Hydro trans: 52.2 PS (38.4 KW; 51.5 HP) at 2,700 rpm |
Torque | 167.7 N·m (17.1 kg·m, 123.6 ft·lb) |
Starter | Electric |
Oil capacity: | 9.4 L (9.93 US. qt, 8.27 Imp. qt.) |
Coolant capacity: | 6.5 L (6.87 US. qt, 5.72 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Mechanical, Wet disk type |
Transmission model | – |
Transmission type | Sync shuttle with dry type single stage clutch |
Gears | 8 forward and 8 reverse |
Speed | Forward: 25.9 kmh (16.1 mph) Reverse: 23.7 (14.7 mph) |
Transmission oil capacity | 44.0 L (11.6 US. gal, 9.7 Imp. gal.) |
Transmission model | – |
Transmission type | Hydrostatic |
Gears | Infinite (3-range) forward and reverse |
Speed | Forward: 25.9 kmh (16.1 mph) Reverse: 23.3 (14.5 mph) |
Transmission oil capacity | 44.0 L (11.6 US. gal, 9.7 Imp. gal.) |
Tires | |
Front tires | Ag: 7.5L- 5 (2WD), 9.5-16 (4WD) |
Rear tires | Ag: 14.9-26 |
Three-Point Hitch | |
Caterogy | II/I |
Control type | Position control, draft control (option) |
Lift capacity (at ends) | 1,300 kg (2,867 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent with electro-hydraulic wet disc clutch |
Rear PTO spped | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Hydraulic capacity | 44.0 L (46.49 US. qt, 38.71 Imp. qt.) |
Pressure | 2,560 psi (176 bar) |
Valves | 1 to 3 |
Pump flow | 9.5 gpm (36 lpm) |
Steering flow | 4.9 gpm (18.5 lpm) |
Total flow | 14.4 gpm (54.5 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment