The John Deere 4320 is a 2WD or 4WD row-crop tractor manufactured by the John Deere in Waterloo, Iowa, USA from 1971 to 1972. The John Deere 4320 is equipped with a 6.6 L six-cylinder diesel engine and partially synchronized transmission with dry disc clutch and 8 forward and 2 reverse gears.
The JD 4320 row-crop tractor used the John Deere engine. It is a 6.6 L, 6,620 cm2, (404.0 cu·in) six-cylinder turbocharged diesel engine with 108.0 mm (4.25 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke. The compression ratio rating is 15.7:1. This engine produced 116.7 PS (85.8 kW; 115.0 HP) of PTO output power.
The John Deere 4320 is equipped with power steering, differential hydraulic wet disc brakes, open operator station (two-post ROPS, canopy or Cab was available as an option) and 166.5 liters (44 US gal.; 36.6 Imp. gal) fuel tank.
Following attachments are available for the JD 4320 row-crop tractor:
- John Deere 148 loader
- John Deere 158 loader
John Deere 4320 Specifications
General Specifications | |
Model | John Deere 4320 |
Length | 4,040 mm (159.1 in) |
Width | 2,270 mm (89.4 in) Long axle: 2,430 mm (95.9 in) Extra long axle: 2,630 mm (103.9 in) Dual axle: 2,870 mm (113.0 in) |
Height | 2,710 mm (106.7 in) |
Wheel base | 2,700 mm (106.3 in) |
Weight | 4,842 kg (10,675 lbs) |
Fuel tank capacity | 166.5 liters (44 US gal.; 36.6 Imp. gal) |
Battery | – |
Cabin type | Open operator station. Two-post ROPS and canopy (option). Cab (option) |
Engine | |
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 6.6 L, 6,620 cm2, (404.0 cu·in) |
Bore and stroke | 108.0 mm X 121.0 mm (4.25 in X 4.76 in) |
Compression ratio | 15.7:1 |
Horsepower | 116.7 PS (85.8 kW; 115.0 HP) |
Starter | Electric |
Oil capacity: | 15.0 L (15.9 US. qt, 13.2 Imp. qt.) |
Coolant capacity: | 16.5 L (17.4 US. qt, 14.5 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Differential hydraulic wet disc |
Transmission model | John Deere Syncro-Range |
Transmission type | Partially synchronized with dry disc clutch |
Gears | 8 forward and 2 reverse |
Speed | Forward: 30.4 kmh (18.9 mph) Reverse: 10.6 (6.6 mph) |
Transmission oil capacity | 53.0 L (14 US. gal, 11.7 Imp. gal.) |
Tires | |
Front tires | Ag: 10.00-16 |
Rear tires | Ag: 18.4-34 |
Three-Point Hitch | |
Caterogy | II |
Control type | – |
Lift capacity (at ends) | 1,700 kg (3,749 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO spped | 540/1000, 1000 rpm |
Hydraulic system | |
Hydraulic type | Closed center |
Hydraulic capacity | 53.0 L (56 US. qt, 46.63 Imp. qt.) |
Valves | 1 to 3 |
Pump flow | 22.0 gpm (83.3 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment