John Deere 3038E (2008-2012)

John Deere 3038E (2008-2012)The John Deere 3038E is a 4WD compact utility tractor manufactured by the John Deere in Augusta, Georgia, USA from 2008 to 2019. The first generation of the JD 3038E was manufactured from 2008 to 2012, and the second generation from 2013 to 2019. The JD 3038E compact utility tractor is equipped with a 1.5 L three-cylinder turbocharged diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.

The John Deere 3038E compact utility tractor used the Yanmar 3TNV84T engine. It is a 1.5 L, 1,496 cm2, (91.3 cu·in) three-cylinder turbocharged diesel engine with 84.0 mm (3.31 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. This engine produced 36.9 PS (27.1 kW; 36.3 HP) at 2,400 rpm of gross output power and 120.0 N·m (12.2 kg·m, 88.4 ft·lb) of maximum torque.

The John Deere 3038E is equipped with power steering, wet disc brakes, open operator station with two-post ROPS and 24.2 liters (6.4 US gal.; 5.3 Imp. gal) fuel tank.

Following attachments are available for the JD 3038E compact utility tractor:

  • John Deere 305 loader
  • John Deere D160 loader

John Deere 3038E Specifications

General Specifications
ModelJohn Deere 3038E
Length2,810 mm (110.6 in)
Width1,470 mm (57.9 in)
Height2,090 mm (82.3 in)
Wheel base1,520 mm (59.8 in)
Weight987 kg (2,176 lbs)
Fuel tank capacity24.2 liters (6.4 US gal.; 5.3 Imp. gal)
Battery12V, CCA 500A, Size 22NF
Cabin typeOpen operator station with two-post ROPS
Engine
Engine modelYanmar 3TNV84T
Engine typeFour-stroke, liquid-cooled, inline
Cylinders3
Fuel typeDiesel
Displacement1.5 L, 1,496 cm2, (91.3 cu·in)
Bore and stroke84.0 mm X 90.0 mm (3.31 in X 3.54 in)
Compression ratio19.0:1
Horsepower36.9 PS (27.1 kW; 36.3 HP) at 2,400 rpm
Torque120.0 N·m (12.2 kg·m, 88.4 ft·lb)
StarterElectric
Oil capacity:4.5 L (4.8 US. qt, 4 Imp. qt.)
Coolant capacity:4.2 L (4.4 US. qt, 3.7 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typePower
BrakesWet disc
Front axle3.8 liters (4.0 US. qts, 3.3 Imp. qts)
Transmission model
Transmission typeHydrostatic
GearsInfinite (2-range) forward and reverse
Speed Forward: 20.0 kmh (12.4 mph) Reverse: 20.0 (12.4 mph)
Transmission oil capacity21.0 L (5.5 US. gal, 4.6 Imp. gal.)
Tires
Front tires Ag: 7.00-14
Lawn/turf: 27×8.5-15
Industrial: 25×8.5-14
Rear tires Ag: 11.2-24
Lawn/turf: 41×14.0-20
Industrial: 15.00-19.5
Three-Point Hitch
CaterogyI
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO spped540 rpm
Hydraulic system
Hydraulic typeOpen center
Hydraulic capacity21.0 L (22.19 US. qt, 18.48 Imp. qt.)
Pressure2500 psi (172.4 bar)
Pump flow5.3 gpm (20.1 lpm)
Steering flow4.0 gpm (15.1 lpm)
Total flow9.3 gpm (35.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*