The John Deere 4100 is a 4WD compact utility tractor from the 4000 series. This tractor was manufactured by the John Deere in Augusta, Georgia, USA from 1998 to 2001. The John Deere 4100 utility tractor is equipped with a 1.0 L three-cylinder diesel engine and one of two transmissions: partially synchronized transmission with 8 forward and 4 reverse gears or hydrostatic transmission with infinite (2-range) forward and reverse.
The JD 4100 compact utility tractor used the Yanmar 3TNE74 engine. It is a 1.0 L, 1,006 cm2, (61.4 cu·in) three-cylinder natural aspirated diesel engine with 74.0 mm (2.91 in) of the cylinder bore and 78.0 mm (3.07 in) of the piston stroke. The compression ratio rating is 23.5:1. This engine produced 20.3 PS (14.9 kW; 20.0 HP) at 2,650 rpm of gross output power and 53.8 N·m (5.5 kg·m, 39.7 ft·lb) of torque.
The John Deere 4100 is equipped with power steering, differential wet disc brakes, two-post ROPS and 22.0 liters (5.8 US gal.; 4.8 Imp. gal) fuel tank. The JD 4100 utility tractor could be equipped with the John Deere 410 loader.
John Deere 4100 Specifications
| General Specifications | |
| Model | John Deere 4100 |
| Length | 2,610 mm (102.8 in) |
| Width | 1,090 mm (42.9 in) Narrow: 910 mm (36.0 in) |
| Height | 2,000 mm (78.7 in) |
| Wheel base | 1,470 mm (57.9 in) |
| Weight | Gear: 688 kg (1,517 lbs) Hydro: 709 kg (1,565 lbs) |
| Fuel tank capacity | 22.0 liters (5.8 US gal.; 4.8 Imp. gal) |
| Battery | 12V, CCA 433A |
| Cabin type | Two-post ROPS |
| Engine | |
| Engine model | Yanmar 3TNE74 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.0 L, 1,006 cm2, (61.4 cu·in) |
| Bore and stroke | 74.0 mm X 78.0 mm (2.91 in X 3.07 in) |
| Compression ratio | 23.5:1 |
| Horsepower | 20.3 PS (14.9 kW; 20 HP) at 2,650 rpm |
| Torque | 53.8 N·m (5.5 kg·m, 39.7 ft·lb) |
| Starter | Electric |
| Oil capacity: | 2.2 L (2.3 US. qt, 1.9 Imp. qt.) |
| Coolant capacity: | 2.4 L (2.5 US. qt, 2.1 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Differential wet disc |
| Differential lock | Mechanical |
| Transmission model | – |
| Transmission type | Partially synchronized |
| Gears | 8 forward and 4 reverse |
| Speed | Forward: 17.7 kmh (11 mph) Reverse: 9.2 (5.7 mph) |
| Transmission oil capacity | 8.7 L (2.3 US. gal, 1.9 Imp. gal.) |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (2-range) forward and reverse |
| Speed | Forward: 17.1 kmh (10.6 mph) Reverse: 8.5 (5.3 mph) |
| Transmission oil capacity | 12.5 L (3.3 US. gal, 2.7 Imp. gal.) |
| Tires | |
| Front tires | Ag: 5.00-12 Lawn/turf: 23×8.50-12 Industrial: 23×8.50-12 |
| Rear tires | Ag: 9.5-16, 8.00-16 (Narrow) Lawn/turf: 315x75D-15 Industrial: 12.00×16.5 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | – |
| Lift capacity (at 610 mm/24 in) | 420 kg (926 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | – |
| Middle PTO spped | 1,000 rpm |
| Rear PTO type | Gear: transmission; Hydro: independent |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pressure | 2418 psi (166.7 bar) |
| Total flow | 5.1 gpm (19.3 lpm) |
Be the first to comment