The Kubota L2500 is a 2WD (L2500F) or 4WD (L2500DT) compact utility tractor from the L series. This tractor was manufactured by the Kubota from 1998 to 2000. The Kubota L2500 is equipped with a 1.4 L three-cylinder diesel engine and sliding gear transmission with 8 forward and 2 reverse gears.
The Kubota L2500 compact utility tractor used the Kubota D1403 diesel engine. It is a 1.4 L, 1,393 cm2, (85.0 cu·in) three-cylinder natural aspirated diesel engine with 80.0 mm (3.15 in) of the cylinder bore and 92.4 mm (3.64 in) of the piston stroke. This engine produced 28.6 PS (21.0 kW; 28.0 HP) at 2,800 rpm of gross output power.
The Kubota L2500 is equipped with integral type power steering, mechanical wet disc brakes, open operator station with two-post ROPS and 29.0 liters (7.7 US gal.; 6.4 Imp. gal) fuel tank.
Following attachments are available for the Kubota L2500 compact utility tractor:
- Kubota LA450S loader
- Kubota LB400 loader
Kubota L2500 Specifications
General Specifications | |
Model | Kubota L2500 |
Length | 2,630 mm (103.5 in) |
Width | 1,270 mm (50 in) |
Height | 2,110 mm (83.1 in) |
Wheel base | 1,550 mm (61 in) |
Weight | 1,220 kg (2,690 lbs) |
Fuel tank capacity | 29.0 liters (7.7 US gal.; 6.4 Imp. gal) |
Battery | 12V, 65Ah |
Cabin type | Open operator station with two-post ROPS |
Engine | |
Engine model | Kubota D1403 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 1.4 L, 1,393 cm2, (85.0 cu·in) |
Bore and stroke | 80.0 mm X 92.4 mm (3.15 in X 3.64 in) |
Horsepower | 28.6 PS (21.0 kW; 28.2 HP) at 2,800 rpm |
Starter | Electric |
Coolant capacity: | 6.1 L (6.4 US. qt, 5.4 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Integral type power |
Brakes | Mechanical wet disc |
Transmission model | – |
Transmission type | Sliding gear |
Gears | 8 forward and 2 reverse |
Speed | Forward: 17.8 kmh (11.1 mph) Reverse: 9.4 (5.8 mph) |
Tires | |
Front tires | Ag: 5.00-15 (2WD), 7.00-15 (4WD) |
Rear tires | Ag: 11.2-24 |
Three-Point Hitch | |
Caterogy | I |
Control type | Position control, draft control (option) |
Lift capacity (at ends) | 906 kg (1,998 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | – |
Rear PTO spped | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Pressure | 2205 psi (152 bar) |
Pump flow | 7.2 gpm (27.3 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment