The John Deere 3005 is a 2WD/4WD compact utility tractor from the 3000 series. This tractor was manufactured by the John Deere in Augusta, Georgia, USA from 2008 to 2018. The JD 3005 is equipped with a 1.3 L three-cylinder diesel engine and sliding gear transmission with 8 forward and 2 reverse gears.
The John Deere 3005 compact utility tractor used the Yanmar 3TNV82A engine. It is a 1.3 L, 1,331 cm2, (81.2 cu·in) three-cylinder natural aspirated diesel engine with 82.0 mm (3.23 in) of the cylinder bore and 84.0 mm (3.31 in) of the piston stroke. The compression ratio rating is 18.1:1. This engine produced 27.2 PS (20.0 kW; 27.0 HP) at 2,700 rpm of maximum output power.
The JD 3005 is equipped with manual or power (optional) steering, dry shoe brakes, open operator station with two-post ROPS and 24.0 liters (6.3 US gal.; 5.3 Imp. gal) fuel tank.
John Deere 3005 Specifications
| General Specifications | |
| Model | John Deere 3005 |
| Length | 2,230 mm (87.8 in) |
| Width | 1,370 mm (53.9 in) |
| Height | 2,080 mm (81.9 in) |
| Wheel base | 1,550 mm (61 in) |
| Weight (max) | 1,480 kg (3,262 lbs) |
| Fuel tank capacity | 24.0 liters (6.3 US gal.; 5.3 Imp. gal) |
| Battery | 12V, CCA 500A |
| Cabin type | Open operator station with two-post ROPS |
| Engine | |
| Engine model | Yanmar 3TNV82A |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.3 L, 1,331 cm2, (81.2 cu·in) |
| Bore and stroke | 82.0 mm X 84.0 mm (3.23 in X 3.31 in) |
| Compression ratio | 18.1:1 |
| Horsepower | 27.2 PS (20.0 kW; 27.0 HP) at 2,700 rpm |
| Starter | Electric |
| Oil capacity: | 2.8 L (3 US. qt, 2.5 Imp. qt.) |
| Coolant capacity: | 4.7 L (5 US. qt, 4.1 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Manual or power (optional) |
| Brakes | Dry shoe |
| Front axle gear case (MFWD) | 3.0 L (3.2 US.qts, 2.6 Imp. qts) |
| Transmission model | – |
| Transmission type | Sliding gear |
| Gears | 8 forward and 2 reverse |
| Speed | Forward: 20.5 kmh (12.7 mph) Reverse: 5.8 (3.6 mph) |
| Transmission oil capacity | 15.0 L (4 US. gal, 3.3 Imp. gal.) |
| Tires | |
| Front tires | Ag: 5.00-15 (2WD), 7.00-14 (4WD) |
| Rear tires | Ag: 11.2-24 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | – |
| Lift capacity (at 610 mm / 24 in) | 370 kg (816 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | Optional |
| Middle PTO spped | 2,000 rpm |
| Rear PTO type | Live with two stage clutch |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 15.0 L (15.85 US. qt, 13.2 Imp. qt.) |
| Pressure | 2,050 psi (141 bar) |
| Valves | 2 |
| Pump flow | 5.8 gpm (22 lpm) |
| Steering flow | 4.5 gpm (17 lpm) |
| Total flow | 10.3 gpm (39 lpm) |
Be the first to comment