The John Deere 4105 is a 4WD compact utility tractor manufactured by the John Deere in Augusta, Georgia, USA from 2008 to 2014. The JD 4105 is equipped with a 1.5 L three-cylinder turbocharged diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.
The John Deere 4105 compact utility tractor used the Yanmar 3TNV84T engine. It is a 1.5 L, 1,499 cm2, (91.5 cu·in) three-cylinder turbocharged diesel engine with 84.0 mm (3.31 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. The compression ratio rating is 19.0:1. This engine produced 41.6 PS (30.6 kW; 41.0 HP) at 2,800 rpm of horsepower and 124.5 N·m (12.7 kg·m, 91.8 ft·lb) at 1,900 rpm of torque.
The John Deere 4105 is equipped with power steering, wet disc brakes, open operator station with two-post foldable ROPS and 43.5 liters (11.5 US gal.; 9.6 Imp. gal) fuel tank. The JD 4105 could be equipped with John Deere 300CX loader.
John Deere 4105 Specifications
| General Specifications | |
| Model | John Deere 4105 |
| Length | 3,050 mm (120.1 in) |
| Width | 1,670 mm (65.7 in) |
| Height | 2,220 mm (87.4 in) |
| Wheel base | 1,720 mm (67.7 in) |
| Weight (max) | 3,265 kg (7198.1 lbs) |
| Fuel tank capacity | 43.5 liters (11.5 US gal.; 9.6 Imp. gal) |
| Battery | 12V, CCA 500A |
| Cabin type | Open operator station with two-post foldable ROPS |
| Engine | |
| Engine model | Yanmar 3TNV84T |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.5 L, 1,499 cm2, (91.5 cu·in) |
| Bore and stroke | 84.0 mm X 90.0 mm (3.31 in X 3.54 in) |
| Compression ratio | 19.0:1 |
| Horsepower | 41.6 PS (30.6 kW; 41.0 HP) at 2,800 rpm |
| Torque | 124.5 N·m (12.7 kg·m, 91.8 ft·lb) at 1,900 rpm |
| Starter | Electric |
| Oil capacity: | 4.3 L (4.5 US. qt, 3.8 Imp. qt.) |
| Coolant capacity: | 5.3 L (5.6 US. qt, 4.7 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (2-range) forward and reverse |
| Speed | Forward: 20.9 kmh (13 mph) Reverse: 20.3 (12.6 mph) |
| Transmission oil capacity | 31.5 L (8.3 US. gal, 6.9 Imp. gal.) |
| Tires | |
| Front tires | Ag: 8-16 |
| Rear tires | Ag: 14.9-24 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | – |
| Lift capacity (at ends) | 1,150 kg (2,536 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 31.5 L (34.0 US. qt, 27.7 Imp. qt.) |
| Pressure | 2,500 psi (172.4 bar) |
| Valves | 3 |
| Pump flow | 9.2 gpm (34.8 lpm) |
| Steering flow | 5.7 gpm (21.6 lpm) |
| Total flow | 14.8 gpm (56 lpm) |
Be the first to comment