The John Deere 4510 is a 2WD or 4WD compact utility tractor from the 4000 Ten Compact series. This tractor was manufactured by the John Deere in Augusta, Georgia, USA from 2003 to 2004. The JD 4510 is equipped with a 2.0 L four-cylinder diesel engine and one of two transmissions: SyncShift transmission with 9 forward and 3 reverse gears or PowrReverser transmission with 12 forward and 12 reverse gears.
The John Deere 4510 compact utility tractor used the Yanmar 4TNE84 engine. It is a 2.0 L, 1,995 cm2, (121.7 cu·in) four-cylinder natural aspirated diesel engine with 84.0 mm (3.31 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. The compression ratio rating is 18.0:1. This engine produced 38.9 PS (28.6 kW; 38.4 HP) at 2,600 rpm of maximum output power and 124.8 N·m (12.7 kg·m, 92 ft·lb) at 1,700 rpm of torque.
The JD 4510 is equipped with power steering, wet disc brakes, open operator station with ROPS and 47.3 liters (12.5 US gal.; 10.4 Imp. gal) fuel tank.
Following attachments are available for the John Deere 4510 compact utility tractor:
- Mid-mount John Deere 72 in (1,820 mm) mower deck with 3-blades
- John Deere 460 loader
John Deere 4510 Specifications
| General Specifications | |
| Model | John Deere 4510 |
| Length | 3,420 mm (134.6 in) |
| Width | 1,570 mm (61.8 in) |
| Height | 2,320 mm (91.3 in) |
| Wheel base | 1,810 mm (71.3 in) |
| Weight | 1,564 kg (3,448 lbs) |
| Fuel tank capacity | 47.3 liters (12.5 US gal.; 10.4 Imp. gal) |
| Battery | 12V, CCA 690A |
| Cabin type | Open operator station with ROPS |
| Engine | |
| Engine model | Yanmar 4TNE84 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 2.0 L, 1,995 cm2, (121.7 cu·in) |
| Bore and stroke | 84.0 mm X 90.0 mm (3.31 in X 3.54 in) |
| Compression ratio | 18.0:1 |
| Horsepower | 38.9 PS (28.6 kW; 38.4 HP) at 2,600 rpm |
| Torque | 124.8 N·m (12.7 kg·m, 92 ft·lb) at 1,700 rpm |
| Starter | Electric |
| Oil capacity: | 4.8 L (5.1 US. qt, 4.2 Imp. qt.) |
| Coolant capacity: | 6.1 L (6.4 US. qt, 5.4 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc |
| Transmission model | SyncShift |
| Transmission type | Partially synchronized |
| Gears | 9 forward and 3 reverse |
| Speed | Forward: 23.3 kmh (14.5 mph) Reverse: 14.3 (8.9 mph) |
| Transmission oil capacity | 36.7 L (9.7 US. gal, 8.1 Imp. gal.) |
| Transmission model | PowrReverser |
| Transmission type | Power shuttle |
| Gears | 12 forward and 12 reverse |
| Speed | Forward: 25.6 kmh (15.9 mph) Reverse: – (0 mph) |
| Transmission oil capacity | 36.7 L (9.7 US. gal, 8.1 Imp. gal.) |
| Tires | |
| Front tires | Ag: 6.00-16 (2WD), 7.00-16 or 8.00-16 (4WD) Lawn/turf: 27×10.5-15, 27x12LL-15 (4WD) Industrial: 10.00-16.5 (4WD) |
| Rear tires | Ag: 13.6-24, 14.9-24 Lawn/turf: 44×18.00-20, 22.5LL-16.1 Industrial: 17.5L-24 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | – |
| Lift capacity (at ends) | 1,134 kg (2,500 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | Optional |
| Middle PTO spped | 2,100 rpm |
| Rear PTO type | Independent |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 36.7 L (38.78 US. qt, 32.29 Imp. qt.) |
| Pressure | 2,500 psi (172 bar) |
| Pump flow | 10.6 gpm (40.1 lpm) |
| Steering flow | 5.3 gpm (20.1 lpm) |
| Total flow | 15.9 gpm (60.2 lpm) |
Be the first to comment