The John Deere X595 is a 4WD lawn and garden tractor from the HDGT X series. This tractor was manufactured by the John Deere in Horicon, Wisconsin, USA from 2002 to 2006.
The John Deere X595 is equipped with one of two engines: a 1.0 L three-cylinder diesel engine or a 1.1 L three-cylinder diesel engine and shaft-driven hydrostatic transmission with infinite forward and reverse gears.
The JD X595 is equipped with hydrostatic power steering, mechanical wet disc brakes, open operator station and 24.6 liters (6.5 US gal.; 5.4 Imp. gal) fuel tank.
The tractor could be equipped with the following engines:
- Yanmar 3TNE74. It is a 1 L, 1,006 cm2, (61.4 cu·in) three-cylinder natural aspirated diesel engine with 74.0 mm (2.91 in) of the cylinder bore and 78.0 mm (3.07 in) of the piston stroke. The compression ratio rating is 23.0:1. This engine produced 24.3 PS (17.9 kW; 24.0 HP) at 3,475 rpm of horsepower.
- Yanmar 3TNV76. It is a 1.1 L, 1,116 cm2, (68.1 cu·in) three-cylinder natural aspirated diesel engine. The cylinder bore is 76.0 mm (2.99 in) and the piston stroke is 82.0 mm (3.22 in). The compression ratio rating is 23.4:1. This engine produced 24.3 PS (17.9 kW; 24.0 HP) at 3,425 rpm of output power.
Following attachments are available for the JD X595 garden tractor:
- Mid-mount John Deere 48C 48 in (1,210 mm) mower deck with 3-blades and hydraulic lift
- Mid-mount John Deere 54C 54 in (1,370 mm) mower deck with 3-blades and hydraulic lift
- Mid-mount John Deere 62C 62 in (1,570 mm) mower deck with 3-blades and hydraulic lift
- John Deere 45 loader
John Deere X595 Specifications
| General Specifications | |
| Model | John Deere X595 |
| Length | 2,000 mm (78.7 in) |
| Width | 1,180 mm (46.5 in) |
| Height | 1,270 mm (50 in) |
| Wheel base | 1,410 mm (55.5 in) |
| Weight | 489 kg (1,078 lbs) |
| Fuel tank capacity | 24.6 liters (6.5 US gal.; 5.4 Imp. gal) |
| Battery | 12V, CCA 500A |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Yanmar 3TNE74 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.0 L, 1,006 cm2, (61.4 cu·in) |
| Bore and stroke | 74.0 mm X 78.0 mm (2.91 in X 3.07 in) |
| Compression ratio | 23.0:1 |
| Horsepower | 24.3 PS (17.9 kW; 24.0 HP) at 3,475 rpm |
| Starter | Electric |
| Oil type | SAE 10W-30 |
| Oil capacity: | 2.8 L (3 US. qt, 2.5 Imp. qt.) |
| Coolant capacity: | 2.8 L (3 US. qt, 2.5 Imp. qt.) |
| Engine | |
| Engine model | Yanmar 3TNV76 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.1 L, 1116 cm2, (68.1 cu·in) |
| Bore and stroke | 76.0 mm X 82.0 mm (2.99 in X 3.22 in) |
| Compression ratio | 23.4:1 |
| Horsepower | 24.3 PS (17.9 kW; 24.0 HP) at 3,425 rpm |
| Starter | Electric |
| Oil type | SAE 10W-30 |
| Oil capacity: | 2.1 L (2.2 US. qt, 1.8 Imp. qt.) |
| Coolant capacity: | 2.8 L (3 US. qt, 2.5 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Mechanical wet disc |
| Transmission model | Tuff Torq K92 |
| Transmission type | Shaft-driven hydrostatic |
| Gears | Infinite forward and reverse |
| Speed | Forward: 13.7 kmh (8.5 mph) Reverse: 8.0 (5 mph) |
| Transmission oil capacity | 6.6 L (1.7 US. gal, 1.5 Imp. gal.) |
| Tires | |
| Front tires | Lawn/turf: 18×8.5-10 |
| Rear tires | Lawn/turf: 26×12-12 |
| Three-Point Hitch | |
| Caterogy | 0 (optional) I Limited (optional) |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Front PTO type | Optional |
| Front PTO spped | 2,000 rpm |
| Rear PTO type | Optional |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | – |
| Pressure | 2,000 psi (138 bar) |
| Valves | 2 |
| Total flow | 6.2 gpm (23.5 lpm) |
Be the first to comment