The Cub Cadet 70 is a 2WD garden tractor manufactured by the Cub Cadet (a part of International Harvester) in Louisville, Kentucky, USA from 1963 to 1965. The Cub Cadet 70 is equipped with a 0.3 L single-cylinder gasoline engine and shaft-driven gear transmission with 3 forward and 1 reverse gear or creeper with 6 forward and 2 reverse gear.
The Cub Cadet 70 garden tractor used the Kohler K161 engine. It is a 0.3 L, 266 cm2, (16.25 cu·in) single-cylinder natural aspirated gasoline engine with 73.0 mm (2.87 in) of the cylinder bore and 63.5 mm (2.52 in) of the piston stroke. This engine produced 7.1 PS (5.2 kW; 7.0 HP) at 3,600 rpm of maximum output power.
The Cub Cadet 70 is equipped with manual steering, dry disc brakes, open operator station and 4.7 liters (1.2 US gal.; 1 Imp. gal) fuel tank.
Cub Cadet 70 Specifications
General Specifications | |
Model | Cub Cadet 70 |
Length | – |
Width | – |
Height | 1,010 mm (39.8 in) |
Wheel base | 1,090 mm (42.9 in) |
Weight | – |
Fuel tank capacity | 4.7 liters (1.2 US gal.; 1 Imp. gal) |
Battery | 12V |
Cabin type | Open operator station |
Engine | |
Engine model | Kohler K161 |
Engine type | Four-stroke, air-cooled |
Cylinders | 1 |
Fuel type | Gasoline |
Displacement | 0.3 L, 266 cm2, (16.25 cu·in) |
Bore and stroke | 73.0 mm X 63.5 mm (2.87 in X 2.52 in) |
Horsepower | 7.1 PS (5.2 kW; 7.0 HP) at 3,600 rpm |
Starter | Electric (K161S) or retractable (K161T) |
Spark plug | Champion RJ8C |
Spark plug gap | 0.65 mm (0.0256 in) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual |
Brakes | Dry disc |
Transmission model | – |
Transmission type | Shaft-driven gear |
Gears | 3 forward and 1 reverse |
Transmission model | – |
Transmission type | Creeper |
Gears | 6 forward and 2 reverse |
Tires | |
Front tires | Lawn/turf: 4.80×4.00-8, 16×6.50-8 |
Rear tires | Lawn/turf: 6-12, 8-12 |
PTO (Power take-off shaft) | |
Rear PTO type | Transmission |
Rear PTO spped | – |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment