The John Deere 1010 is a 2WD utility tractor from the New Generation series. This tractor was manufactured by the John Deere in Dubuque, Iowa, USA from 1960 to 1965.
The John Deere 1010 is equipped with one of two engines: a 2.4 L four-cylinder diesel engine or a 1.9 L four-cylinder gasoline engine and sliding gear transmission with dry disc clutch and 5 forward and 1 reverse gear.
The JD 1010 is equipped with manual or power (optional) steering, mechanical disc brakes, open operator station, and 45.4 liters (12 US gal.; 10 Imp. gal) fuel tank.
The tractor could be equipped with the following engines:
- John Deere diesel. It is a 2.4 L, 2,368 cm2, (144.5 cu·in) four-cylinder natural aspirated diesel engine with 92.0 mm (3.62 in) of the cylinder bore and 89.0 mm (3.5 in) of the piston stroke. The compression ratio rating is 18.0:1. This engine produced 36.6 PS (26.9 kW; 36.0 HP) at 2,500 rpm of PTO output power.
- John Deere gas. It is a 1.9 L, 1,893 cm2, (115.5 cu·in) four-cylinder natural aspirated gasoline engine. The cylinder bore is 89.0 mm (3.5 in) and the piston stroke is 76.0 mm (2.99 in). The compression ratio rating is 8.3:1. This engine produced 36.6 PS (26.9 kW; 36.0 HP) at 2,500 rpm of PTO horsepower.
The John Deere tractor variants:
- 1010RU: row-crop utility
- 1010C: crawler
- 1010U: utility
- 1010RS: single row-crop
- 1010R: row-crop
- 1010O: orchard
- 1010RUS: special row-crop utility
- 1010W: wheeled industrial
John Deere 1010 Specifications
| General Specifications | |
| Model | John Deere 1010 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | – |
| Weight | 1,780 kg (3,925 lbs) |
| Fuel tank capacity | 45.4 liters (12 US gal.; 10 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station |
| Engine | |
| Engine model | John Deere |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 2.4 L, 2,368 cm2, (144.5 cu·in) |
| Bore and stroke | 92.0 mm X 89.0 mm (3.62 in X 3.5 in) |
| Compression ratio | 18.0:1 |
| Horsepower | 36.6 PS (26.9 kW; 36.0 HP) at 2,500 rpm |
| Starter | Electric |
| Oil capacity: | 10.4 L (11 US. qt, 9.2 Imp. qt.) |
| Engine | |
| Engine model | John Deere |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Gasoline |
| Displacement | 1.9 L, 1,893 cm2, (115.5 cu·in) |
| Bore and stroke | 89.0 mm X 76.0 mm (3.5 in X 2.99 in) |
| Compression ratio | 8.3:1 |
| Horsepower | 36.6 PS (26.9 kW; 36.0 HP) at 2,500 rpm |
| Starter | electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Manual or power (optional) |
| Brakes | Mechanical disc |
| Transmission model | – |
| Transmission type | Sliding gear with dry disc clutch |
| Gears | 5 forward and 1 reverse |
| Tires | |
| Front tires | Ag: 5.00-15, 6.00-16 |
| Rear tires | Ag: 10-34, 12-28 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | Transmission or independent (optional) |
| Rear PTO spped | 540, 540/1,000 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 17.0 L (17.96 US. qt, 14.96 Imp. qt.) |
Be the first to comment