Kubota M59

Kubota M59The Kubota M59 is a 4WD backhoe loader tractor from the M series. This tractor was manufactured by Kubota from 2008 to 2015. The Kubota M59 is equipped with a 2.4 L four-cylinder diesel engine and hydrostatic transmission with infinite (6-range) forward and reverse gears.

The Kubota M59 backhoe loader tractor used the V2403 engine. It is a 2.4 L, 2,434 cm2, (148.5 cu·in) four-cylinder turbocharged diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 102.4 mm (4.03 in) of the piston stroke. This engine produced 59.8 PS (44.0 kW; 59.0 HP) at 2,700 rpm of net output power.

The Kubota M59 is equipped with hydrostatic power steering, wet disc type brakes, four-post ROPS with FOPS canopy and 55.0 liters (14.5 US gal.; 12.1 Imp. gal) fuel tank.

Following attachments are available for the Kubota M59 backhoe loader tractor:

  • Kubota loader
  • Kubota backhoe

Kubota M59 Specifications

General Specifications
ModelKubota M59
Length6,490 mm (255.5 in)
Width1,900 mm (74.8 in)
Height2,550 mm (100.4 in)
Wheel base2,040 mm (80.3 in)
Weight (with loader and backhoe)3,785 kg (8,344 lbs)
Fuel tank capacity55.0 liters (14.5 US gal.; 12.1 Imp. gal)
Battery12V, 80Ah
Cabin typeFour-post ROPS with FOPS canopy
Engine
Engine modelV2403
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement2.4 L, 2434 cm2, (148.5 cu·in)
Bore and stroke87.0 mm X 102.4 mm (3.43 in X 4.03 in)
Horsepower59.8 PS (44.0 kW; 59.0 HP) at 2,700 rpm
StarterElectric
Oil capacity:9.4 L (9.9 US. qt, 8.3 Imp. qt.)
Coolant capacity:8.2 L (8.7 US. qt, 7.2 Imp. qt.)
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesWet disc type
Differential lockRear standard
Transmission modelHST Plus
Transmission typeHydrostatic
GearsInfinite (6-range) forward and reverse
Speed Forward: 25.6 kmh (15.9 mph) Reverse: 25.6 (15.9 mph)
Transmission oil capacity45.0 L (11.9 US. gal, 9.9 Imp. gal.)
Tires
Front tires Lawn/turf: 11-16
Industrial: 10×16.5
Rear tires Lawn/turf: 16.9L-24
Industrial: 17.5L-24
Three-Point Hitch
CaterogyII/I (optional)
Control typePosition control
Lift capacity (at ends)1,750 kg (3,860 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO spped540 rpm
Hydraulic system
Hydraulic typeOpen center
Hydraulic capacity45.0 L (47.55 US. qt, 39.59 Imp. qt.)
Total flow26.7 gpm (101.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*