The John Deere 4115 is a 4WD compact utility tractor from the 4000 Ten Compact series. This tractor was manufactured by Yanmar for John Deere in Japan from 2003 to 2004. The John Deere 4115 is equipped with a 1.2 L three-cylinder diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.
The JD 4115 compact utility tractor used the Yanmar 3TNE78A engine. It is a 1.2 L, 1,204 cm2, (73.5 cu·in) three-cylinder natural aspirated diesel engine with 78.0 mm (3.07 in) of the cylinder bore and 84.0 mm (3.31 in) of the piston stroke. This engine produced 24.3 PS (17.9 kW; 24.0 HP) at 2,650 rpm of output power.
The John Deere 4115 is equipped with power steering, wet disc brakes, open operator station with two-post ROPS and 22.0 liters (5.8 US gal.; 4.8 Imp. gal) fuel tank.
Following attachments are available for the JD 4115 compact utility tractor:
- Mid-mount John Deere: 60 in (1,520 mm) mower deck
- Mid-mount John Deere: 72 in (1,820 mm) mower deck with 3-blades
- John Deere 410 loader
John Deere 4115 Specifications
General Specifications | |
Model | John Deere 4115 |
Length | 2,740 mm (107.9 in) |
Width | 1,190 mm (46.9 in) |
Height | 2,050 mm (80.7 in) |
Wheel base | 1,640 mm (64.6 in) |
Weight (operating) | 800 kg (1,765 lbs) |
Fuel tank capacity | 22.0 liters (5.8 US gal.; 4.8 Imp. gal) |
Battery | 12V, CCA 435A |
Cabin type | Open operator station with two-post ROPS |
Engine | |
Engine model | Yanmar 3TNE78A |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 1.2 L, 1,204 cm2, (73.5 cu·in) |
Bore and stroke | 78.0 mm X 84.0 mm (3.07 in X 3.31 in) |
Horsepower | 24.3 PS (17.9 kW; 24.0 HP) at 2,650 rpm |
Starter | Electric |
Oil capacity: | 2.4 L (2.5 US. qt, 2.1 Imp. qt.) |
Coolant capacity: | 2.2 L (2.3 US. qt, 1.9 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Wet disc |
Transmission model | – |
Transmission type | Hydrostatic |
Gears | Infinite (2-range) forward and reverse |
Speed | Forward: 19.5 kmh (12.1 mph) Reverse: 9.7 (6 mph) |
Transmission oil capacity | 14.6 L (3.9 US. gal, 3.2 Imp. gal.) |
Tires | |
Front tires | Ag: 5.00-12, 7.00-12 |
Rear tires | Ag: 9.5-16, 35×12.00-16 |
Three-Point Hitch | |
Caterogy | I |
Control type | – |
Lift capacity (at 610 mm / 24 in) | 520 kg (1147 lbs) |
PTO (Power take-off shaft) | |
Middle PTO type | Independent |
Middle PTO speed | 2,100 rpm |
Rear PTO type | Independent |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Hydraulic capacity | 14.6 L (15.43 US. qt, 12.85 Imp. qt.) |
Pump flow | 5.1 gpm (19.3 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment