The Hinomoto E16 is a two-wheel compact utility tractor, manufactured by Japanese company Hinomoto from 1977 to 1979. This utility tractor is equipped with two-cylinders liquid-cooled Toyosha S110 diesel engine with 1.1 l (1106 cc, 67.31 cu-in) of displacement and gear transmission with 6 (3×2) forward and 2 (1×2) reverse gears. This tractor was available in four-wheel version and was called E16D.
The E16 tractor used a two-cylinder naturally-aspirated liquid-cooled Toyosha S110 diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 91.0 mm (3.58 in.) of piston stroke. This motor produced 16.2 PS (11.9 kW; 16 HP) of maximum horsepower.
This utility tractor is equipped with gear shift transmission with 6 forward (up to 13.0 km/h, 8.1 mph) and 2 reverse (up to 9.8 km/h, 6.1 mph) gears. The Hinomoto E16 used mechanical steering, standard PTO-shaft, molded asbestos single plate dry clutch and an open operator station.
Hinomoto E16 specifications
General Specifications | |
Model | Hinomoto E16 |
Length | 2,360 mm (93 in.) |
Width | 1,140 mm (45 in.) |
Height | 1,260 mm (50 in.) |
Wheelbase | 1,360 mm (53 in.) |
Ground clearance | 280 mm (28 in.) |
Weight | E16 (2WD): 741 kg (1,635 lb.) E16D (4WD): 798 kg (1,760 lb.) |
Fuel tank capacity | – |
Battery | 12V |
Engine | |
Engine model | Toyosha S110 |
Fuel | Diesel |
Displacement | 1.1 L, 1,106 L (67.3 cu.in.) |
Bore x stroke | 88.0 x 91.0 mm (3.46 x 3.58 in) |
Power output | 16.2 PS (11.9 kW; 16 HP) |
Torque | – |
Starter type | Electric starter |
Oil type | – |
Oil capacity | |
Coolant capacity | |
Valve clearance | Intake: 0.30 mm (0.012 in.) Exhaust: 0.35 mm (0.014 in.) |
Tires size | |
Front tires | 4.00-12 |
Rear tires | 8.3-24 |
Transmission and chassis | |
Chassis | E16: 4×2 2WD E16D: 4×4 MFWD 4WD |
Steering | Mechanical |
Transmission type | Gear |
Gears | 6 forward and 2 reverse |
Ground speed | Forward: up to 13.0 kmh (8.1 mph) Reverse: up to 9.8 kmh (6.1 mph) |
Transmission oil capacity | – |
PTO (Power take-off shaft) | |
PTO Type: | Rear |
PTO Speed: | 547 / 875 / 1000 rpm |
Hydraulic lift | |
3-point linkage: | Category I |
Control system: | – |
No. of remote valves: | – |
Max lifting capacity (at link end): | – |
Hydraulic system | |
Type | – |
Pump flow | – |
Oil capacity | – |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
This info is incorect.