The John Deere 2038R is a 4WD compact utility tractor from the 2R series. This tractor has been manufactured by John Deere in Augusta, Georgia, USA since 2017. The JD 2038R is equipped with a 1.6 L three-cylinder turbocharged diesel engine and hydrostatic transmission with infinite forward and reverse gears.
The John Deere 2038R compact utility tractor used the Yanmar 3TNV88C-NJT engine. It is a 1.6 L, 1,568 cm2, (95.7 cu·in) three-cylinder turbocharged diesel engine with 86.0 mm (3.39 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. The compression ratio rating is 19.1:1. This engine produced 37.8 PS (27.8 kW; 37.3 HP) at 2,500 rpm of output power and 101.4 N·m (10.3 kg·m, 74.7 ft·lb) of torque.
The John Deere 2038R is equipped with power steering, wet disc brakes, two-post foldable ROPS and 32.2 liters (8.5 US gal.; 7.1 Imp. gal) fuel tank.
Following attachments are available for the JD 2038R compact utility tractor:
- Mid-mount John Deere 60 in (1,520 mm) mower deck
- Mid-mount John Deere 72 in (1,820 mm) mower deck
- John Deere 220R loader
John Deere 2038R Specifications
General Specifications | |
Model | John Deere 2038R |
Length | – |
Width | – |
Height | – |
Wheel base | 1,720 mm (67.7 in) |
Weight | 1,105 kg (2,436 lbs) |
Fuel tank capacity | 32.0 liters (8.5 US gal.; 7.1 Imp. gal) |
Battery | 12V, CCA 500A |
Cabin type | Two-post foldable ROPS |
Engine | |
Engine model | Yanmar 3TNV88C-NJT |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 1.6 L, 1568 cm2, (95.7 cu·in) |
Bore and stroke | 86.0 mm X 90.0 mm (3.39 in X 3.54 in) |
Compression ratio | 19.1:1 |
Horsepower | 37.8 PS (27.8 kW; 37.3 HP) at 2,500 rpm |
Torque | 101.4 N·m (10.3 kg·m, 74.7 ft·lb) |
Starter | Electric |
Oil capacity: | 4.5 L (4.8 US. qt, 4 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Wet disc |
Final drive | Spur gear |
Differential lock | Mechanical rear |
Transmission model | – |
Transmission type | Hydrostatic |
Gears | Infinite forward and reverse |
Tires | |
Front tires | Ag: 7.00-12 |
Rear tires | Ag: 12.4-16 |
Three-Point Hitch | |
Caterogy | I |
Control type | Position control |
Lift capacity (at ends) | 615 kg (1,356 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Pressure | 2500 psi (172.4 bar) |
Valves | 0 to 3 |
Pump flow | 5.3 gpm (20.1 lpm) |
Steering flow | 4.0 gpm (15.0 lpm) |
Total flow | 9.3 gpm (35.2 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
I saw a small drip by one of my tires, went to move my tractor, and sprung a huge leak, vacuumed up like 25 gallons of liquid, very foamy. guessing 120 weight oil in tires, and I was unaware that they were filled from the factory. I have owned it for 2 years. could it have frozen, and that’ss what caused the leak to appear