The Cub Cadet 1811 is a 2WD lawn and garden tractor manufactured by Cub Cadet (a part of MTD) in Brownsville, Tennessee, USA from 1986 to 1989. The Cub Cadet 1811 is equipped with a 0.7 L (42.2 cu·in) two-cylinder gasoline engine and a shaft-driven hydrostatic transmission with infinite forward and reverse gears.
The Cub Cadet 1811 garden tractor used the Kohler M18 engine. It is a 0.7 L, 691 cm2, (42.2 cu·in) two-cylinder natural aspirated gasoline engine with 79.0 mm (3.11 in) of the cylinder bore and 70.0 mm (2.76 in) of the piston stroke. This engine produced 18.2 PS (13.4 kW; 18.0 HP) of maximum output power.
The Cub Cadet 1811 is equipped with manual steering, dry disc brakes, open operator station and 15.1 liters (4 US gal.; 3.3 Imp. gal) fuel tank.
Following attachments are available for the Cub Cadet 1811 garden tractor:
- Mid-mount Cub Cadet 38 in (960 mm) mower deck with hydraulic lift
- Mid-mount Cub Cadet 44 in (1,110 mm) mower deck with hydraulic lift
- Mid-mount Cub Cadet 50 in (1,270 mm) mower deck with hydraulic lift
- Front-mount Cub Cadet 42 in (1,060 mm) blade
- Front-mount Cub Cadet 54 in (1,370 mm) blade
- Front-mount Cub Cadet 45 in (1,150 mm) two-stage snowblower
Cub Cadet 1811 Specifications
General Specifications | |
Model | Cub Cadet 1811 |
Length | 1,820 mm (71.7 in) |
Width | 950 mm (37.4 in) |
Height | 1,090 mm (42.9 in) |
Wheel base | 1,110 mm (43.7 in) |
Ground clearance | 150 mm (5.9 in) |
Weight | kg (0 lbs) |
Fuel tank capacity | 15.1 liters (4 US gal.; 3.3 Imp. gal) |
Battery | 12V |
Cabin type | Open operator station |
Engine | |
Engine model | Kohler M18 |
Engine type | Four-stroke, air-cooled, V |
Cylinders | 2 |
Fuel type | Gasoline |
Displacement | 0.7 L, 691 cm2, (42.2 cu·in) |
Bore and stroke | 79.0 mm X 70.0 mm (3.11 in X 2.76 in) |
Horsepower | 18.2 PS (13.4 kW; 18.0 HP) |
Starter | Electric |
Oil capacity: | 1.9 L (2 US. qt, 1.7 Imp. qt.) |
Spark plug |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual |
Brakes | Dry disc |
Final drive | |
Transmission model | – |
Transmission type | Shaft-driven hydrostatic |
Gears | Infinite forward and reverse |
Speed | Forward: 12.1 kmh (7.5 mph) Reverse: 6.4 (4 mph) |
Transmission oil capacity | 6.6 L (1.7 US. gal, 1.5 Imp. gal.) |
Tires | |
Front tires | Lawn/turf: 16×6.50-8 |
Rear tires | Lawn/turf: 23×10.50-12 |
Three-Point Hitch | |
Caterogy | 0 |
Control type | |
Lift capacity (at ends) | kg (0 lbs) |
PTO (Power take-off shaft) | |
Front PTO type | Independent with electric clutch |
Front PTO speed | – rpm |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment