The Farmall 806 is a 2WD row-crop tractor manufactured by International Harvester from 1963 to 1967.
The Farmall 806 row-crop tractor is equipped with one of two engines: a 5.9 L (361.0 cu·in) six-cylinder diesel engine or a 4.9 L (301.0 cu·in) six-cylinder (gasoline or LP-gas version) engine and one of two transmissions: an unsynchronized gear transmission with dry disc clutch and 8 forward and 4 reverse gears or a two-speed power shift transmission with dry disc clutch and 16 forward and 8 reverse gears.
This tractor could be equipped with the following engines:
- International Harvester D-361. It is a 5.9 L, 5,916 cm2, (361.0 cu·in) six-cylinder natural aspirated diesel engine with 105.0 mm (4.13 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 17.0:1.
- Interntional Harvester C301. It is a 4.9 L, 4,933 cm2, (301.0 cu·in) six-cylinder natural aspirated gasoline / LP-gas engine. The cylinder bore is 97.0 mm (3.82 in) and the piston stroke is 112.0 mm (4.41 in). The gasoline version of this engine produced 111.5 PS (82.0 kW; 110 HP) at 2,400 rpm of output power.
The Farmall 806 is equipped with hydrostatic power steering, hydraulic dry disc brakes, Open operator station and 159.0 liters (42 US gal.; 35 Imp. gal) fuel tank for gasoline and diesel fuel or 177.9 liters (47 US gal, 39.1 Imp. gal) for LP-gas. The Farmall 806 could be equipped with the International Harvester 2000 loader.
Farmall 806 Specifications
| General Specifications | |
| Model | Farmall 806 |
| Length | 4,080 mm (160.6 in) |
| Width | 2,790 mm (109.8 in) |
| Height | 2,050 mm (80.7 in) |
| Wheel base | 2,570 mm (101.2 in) |
| Weight | Gas: 3,500 kg (7,715 lbs) Diesel: 3,855 kg (8,500 lbs) |
| Fuel tank capacity | Gas/diesel: 159.0 liters (42 US gal.; 35 Imp. gal) LP-gas: 177.9 liters (47 US gal, 39.1 Imp. gal) |
| Battery | Diesel: Two 6V, 170 Ah, Gas/LP: 12V, 60Ah |
| Cabin type | Open operator station |
| Engine | |
| Engine model | International Harvester D-361 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 5.9 L, 5,916 cm2, (361.0 cu·in) |
| Bore and stroke | 105.0 mm X 114.0 mm (4.13 in X 4.49 in) |
| Compression ratio | 17.0:1 |
| Horsepower | – |
| Starter | Electric |
| Coolant capacity: | 22.7 L (24 US. qt, 20 Imp. qt.) |
| Engine | |
| Engine model | Interntional Harvester C301 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Gasoline |
| Displacement | 4.9 L, 4,933 cm2, (301.0 cu·in) |
| Bore and stroke | 97.0 mm X 112.0 mm (3.82 in X 4.41 in) |
| Horsepower | 111.5 PS (82.0 kW; 110.0 HP) at 2,400 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Hydrostatic power |
| Brakes | Hydraulic dry disc |
| Transmission model | – |
| Transmission type | Unsynchronized gear with dry disc clutch |
| Gears | 8 forward and 4 reverse |
| Speed | Forward: 30.0 kmh (18.6 mph) Reverse: 15.3 (9.5 mph) |
| Transmission model | Torque Amplifier |
| Transmission type | Two-speed power shift with dry disc clutch |
| Gears | 16 forward and 8 reverse |
| Speed | Forward: 30.0 kmh (18.6 mph) Reverse: 15.3 (9.5 mph) |
| Tires | |
| Front tires | Ag: 6.50-16 |
| Rear tires | Ag: 15.5-38 |
| Three-Point Hitch | |
| Caterogy | II/I |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 1,000, 540/1,000 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pump flow | 12.0 gpm (45.4 lpm) |
| Steering flow | 9.0 gpm (34.1 lpm) |
| PTO pump flow | 3.0 gpm (11.4 lpm) |
| Total flow | 24.0 gpm (90.8 lpm) |
Be the first to comment