The Ford 2110 is a two-wheel (2WD) or optional four-wheel (4WD) compact utility tractor, manufactured by Japanese company Shibaura for Ford brand from 1983 to 1987. The Ford 2110 tractor is equipped with four-cylinders Shibaura T854B diesel engine with 2.3 L, 2,268 cc (138.4 cu-in) of displacement and manual transmission with 12 forward and 4 reverse gears.
The Ford 2110 tractor used a four-cylinder naturally-aspirated liquid-cooled diesel engine Shibaura T854B, with 85.0 mm (3.35 in) of the cylinder bore and 100.0 mm (3.94 in) of the piston stroke. Compression ratio rating is 21.0:1. It produced 38.5 PS (28.3 kW; 38.0 HP) of gross horsepower and 35.2 PS (25.9 kW; 34.7 HP) of PTO shaft horsepower. The engine used dry air cleaner and pre-heating glow plugs.
The Ford 2110 utility tractor is equipped with manual transmission with 12 forward (1.7-28.3 km/h, 1.1-17.6 mph) and 4 reverse (2.0-21.3 km/h, 1.2-13.3 mph) gears. The tractor used power steering and differential mechanical drum brakes.
The 2110 tractor can use the following attachments:
- Rear-mount Ford 715 snow blower with hydraulic lift (clearing width: 1,520 mm (60 in.)
- Front-end loader Ford 776A/B
- Backhoe Ford 785A
The Ford 2110 used a two-post rollover protection structure (ROPS) for operators. The tractor has rear PTO shaft with 540 rpm, front PTO was available as an option.
Ford 2110 specifications
| General Specifications | |
| Model | Ford 2110 |
| Length | – |
| Width | – |
| Height | – |
| Wheelbase | 1,850 mm (73.2 in.) |
| Ground clearance | – |
| Weight | 1,610 kg (3,550 lb.) operating |
| Fuel tank capacity | 40.0 L (10.6 US gal.) |
| Battery | 12V |
| Engine | |
| Engine model | Shibaura T854B |
| Number of Cylinders | 3 |
| Firing order | 1-3-4-2 |
| Fuel | Diesel |
| Displacement | 2.3 L, 2,268 cc (138.4 cu.in.) |
| Bore x stroke | 85.0 x 100.0 mm (3.35 x 3.94 in) |
| Power output | Gross: 38.5 PS (28.3 kW; 38.0 HP) PTO: 35.2 PS (25.9 kW; 34.7 HP) |
| Torque | – |
| Starter type | Electric starter |
| Oil type | – |
| Governed Speeds | Low Idle: 750-850 rpm; High Idle: 2,650-2,700 rpm; (no load) Rated: 2,500 rpm (full load) |
| Oil capacity | 7.5 L (7.9 U.S. qt) |
| Coolant capacity | 8.5 L (9.1 U.S. qt) |
| Injection Timing, B.T.D.C. | 23.5°-24.5° |
| Injector opening pressure | 11,760 kPa (1,705 psi) |
| Valve clearance | Intake: 0.30 mm (0.012 in.) Exhaust: 0.30 mm (0.012 in.) |
| Tires size | |
| Front tires | Ag (2WD): 6.00-16 Ag (4WD): 8.00-18 Lawn/turf (2WD): 25×8.50-14 Lawn/turf (4WD): 27×8.50-15 |
| Rear tires | Ag: 13.6-28 Lawn/turf: 18.4×16.1 |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD (opton) |
| Steering | power |
| Transmission type | Gear shift |
| Gears | 12 forward and 4 reverse |
| Ground speed | Forward: up to 29.3 km/h (17.6 mph) Reverse: up to 21.3 km/h (13.3 mph) |
| PTO (Power take-off shaft) | |
| PTO Type: | Rear, live Front (optional) |
| PTO Speed: | Rear: 540 rpm |
| Hydraulic lift | |
| 3-point linkage: | Category I |
| Control system: | – |
| No. of remote valves: | – |
| Max lifting capacity (at link end): | – |
| Hydraulic system | |
| Type | Live |
| Total flow | – |
| Oil capacity (Transmission, Rear Axle and Hydraulic System) | 32.2 L (34.0 US. qt.) |
| Front axle differential case | 5.2 L (5.5 U.S. qt.) |
| Front axle reduction case (Each) | 0.22 L (0.23 U.S. qt.) |
Be the first to comment