AGCO DT225B

AGCO DT225BThe AGCO DT225B is a 4WD row-crop tractor from the DT-B series. This tractor was manufactured by AGCO in Beauvais, France from 2009 to 2010. The AGCO DT225B is equipped with an 8.4 L (512.0 cu·in) six-cylinder diesel engine and a continuously variable transmission with infinite forward and reverse gears.

The AGCO DT225B row-crop tractor used the AGCO SISU POWER 84CTA engine. It is a 8.4 L, 8,390 cm2, (512.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 111.0 mm (4.37 in) of the cylinder bore and 145.0 mm (5.71 in) of the piston stroke. The compression ratio rating is 16.7:1. This engine produced 268.7 PS (197.6 kW; 265.0 HP) at 2,200 rpm of output power, 299.0 PS (220.0 KW; 295.0 HP) of maximum horsepower and 1295.0 N·m (132.1 kg·m, 954.4 ft·lb) at 1,500 rpm of torque.

The AGCO DT225B is equipped with power steering, hydraulic wet disc brakes, Cab, and 590.0 liters (155.9 US gal.; 129.8 Imp. gal) fuel tank for variants with DEF (diesel exhaust fluid) or 690.0 liters (182.3 US gal, 151.8 Imp. gal) without DEF. This tractor could be equipped with the AGCO FL85 loader.

AGCO DT225B Specifications

General Specifications
ModelAGCO DT225B
Length5,470 mm (215.4 in)
Width–
Height3,580 mm (140.9 in)
Wheel base3,100 mm (122 in)
Weight17,640 kg (38,889 lbs)
Fuel tank capacity With DEF: 590.0 liters (155.9 US gal.; 129.8 Imp. gal)
Without DEF: 690.0 liters (182.3 US gal.; 151.8 Imp. gal)
Diesel exhaust fluid (DEF): 30.0 liters (7.9 US gal.; 6.6 Imp. gal)
Battery12V
Cabin typeCab
Engine
Engine modelAGCO SISU POWER 84CTA
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement8.4 L, 8,390 cm2, (512.0 cu·in)
Bore and stroke111.0 mm X 145.0 mm (4.37 in X 5.71 in)
Compression ratio16.7:1
Horsepower268.7 PS (197.6 kW; 265.0 HP) at 2,200 rpm
Torque1295.0 N·m (132.1 kg·m, 954.4 ft·lb) at 1,500 rpm
StarterElectric
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typePower
BrakesHydraulic wet disc
Final driveInboard planetary
Differential lockFull locking electro-hydraulic front and rear
Transmission modelPowerMaxx CVT
Transmission typeContinuously variable transmission
GearsInfinite forward and reverse
Speed Forward: 48.3 kmh (30 mph) Reverse: 38.6 (24 mph)
Tires
Front tiresAg: 420/90R30
Rear tiresAg: 480/80R46
Rear hitch
CaterogyIII or IV
Control type–
Lift capacity (at ends)12,000 kg (26,460 lbs)
Front hitch
CaterogyIII
Lift capacity (at ends)5,000 kg (11,020 lbs)
Drawbar Category III
Category III Heavy Duty
Category IV
PTO (Power take-off shaft)
Front PTO typeOptional
Front PTO speed1,000 rpm
Rear PTO typeIndependent with electro-hydraulic clutch
Rear PTO speed1,000E/1,000 rpm
Hydraulic system
Hydraulic typeClosed center load sensing
Pressure2900 psi (199.9 bar)
Valves4 to 6
SCV flow26.4 gpm (99.9 lpm)
Total flow46.2 gpm (174.9 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*