Massey Ferguson 8480

Massey Ferguson 8480The Massey Ferguson 8480 is a 4WD row-crop tractor from the 8400 series. This tractor was manufactured by Massey Ferguson in France from 2004 to 2007. The Massey Ferguson 8480 is equipped with an 8.4 L (513.0 cu·in) six-cylinder diesel engine and one of two transmissions: the DynaStep transmission with 21 forward and 18 reverse gears or the Dyna-VT transmission with infinite forward and reverse gears.

The MF 8480 row-crop tractor used the Sisu Diesel engine. It is a 8.4 L, 8,407 cm2, (514.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 111.0 mm (4.37 in) of the cylinder bore and 145.0 mm (5.71 in) of the piston stroke. The compression ratio rating is 17.5:1. This engine produced 294.2 PS (216.3 kW; 290.0 HP) at 2,200 rpm of output power.

The Massey Ferguson 8480 is equipped with hydrostatic power steering, independent hydraulic wet disc brakes, Cab standard, and 600.0 liters (158.5 US gal.; 132.0 Imp. gal) fuel tank.

Massey Ferguson 8480 Specifications

General Specifications
ModelMassey Ferguson 8480
Length5,230 mm (205.9 in)
Width
Height3,090 mm (121.7 in)
Wheel base3,070 mm (120.9 in)
Weight9,240 kg (20,371 lbs)
Fuel tank capacity600.0 liters (158.5 US gal.; 132 Imp. gal)
Battery12V
Cabin typeCab standard
Engine
Engine modelSisu Diesel
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement8.4 L, 8,407 cm2, (514.0 cu·in)
Bore and stroke111.0 mm X 145.0 mm (4.37 in X 5.71 in)
Compression ratio17.5:1
Horsepower294.2 PS (216.3 kW; 290.0 HP) at 2,200 rpm
StarterElectric
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesIndependent hydraulic wet disc
Transmission modelDynaStep
Transmission type
Gears21 forward and 18 reverse
Transmission modelDyna-VT
Transmission typeContinuously variable transmission
GearsInfinite forward and reverse
Tires
Front tiresAg: 16.9R30
Rear tiresAg: 18.4R46
Three-Point Hitch
CaterogyIII
Control type
Lift capacity (at 610 mm / 24 in)6,530 kg (14,400 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed 540/1,000 rpm
540E/1,000 rpm (optional)
Hydraulic system
Hydraulic typeClosed center pressure flow compensated (PFC)
Pressure2900 psi (199.9 bar)
Valves4 or 5
Total flow39.0 gpm (147.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*