The Fiat 1300 Super is a 2WD or 4WD row-crop tractor manufactured by Fiat from 1976 to 1979. The Fiat 1300 Super is equipped with a 7.4 L (452.2 cu·in) six-cylinder diesel engine and a transmission with 12 forward and 4 reverse gears (16 forward and 4 reverse with creeper).
The Fiat 1300 Super row-crop tractor used the Fiat OM CP3/100 engine. It is a 7.4 L, 7,411 cm2, (452.2 cu·in) six-cylinder natural aspirated diesel engine with 110.0 mm (4.33 in) of the cylinder bore and 130.0 mm (5.12 in) of the piston stroke. This engine produced 152.2 PS (111.9 kW; 150.0 HP) at 2,400 rpm of output power.
The Fiat 1300 Super is equipped with power steering, mechanical wet disc brakes, open operator station, four-post ROPS or Cab, and 200.0 liters (52.8 US gal.; 44 Imp. gal) fuel tank.
Fiat 1300 Super Specifications
General Specifications | |
Model | Fiat 1300 Super |
Length | 4,180 mm (164.6 in) |
Width | – |
Height | 2,800 mm (110.2 in) |
Wheel base | 2,760 mm (108.7 in) |
Weight | 5,200 kg (11,464 lbs) |
Fuel tank capacity | 200.0 liters (52.8 US gal.; 44 Imp. gal) |
Battery | 12V |
Cabin type | Open operator station, four-post ROPS or Cab |
Engine | |
Engine model | Fiat OM CP3/100 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 7.4 L, 7,411 cm2, (452.2 cu·in) |
Bore and stroke | 110.0 mm X 130.0 mm (4.33 in X 5.12 in) |
Horsepower | 152.2 PS (111.9 kW; 150.0 HP) at 2,400 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Mechanical wet disc |
Final drive | Inboard planetary | Differential lock | Mechanical rear |
Transmission model | – |
Transmission type | – |
Gears | 12 forward and 4 reverse |
Speed | Forward: 25.0 kmh (15.5 mph) Reverse: 11.1 (6.9 mph) |
Tires | |
Front tires | Ag: 11.00-16 (2WD) |
Rear tires | Ag: 18.4/15-38 |
Three-Point Hitch | |
Caterogy | II |
Control type | Position and low-link draft control |
Lift capacity (at ends) | 3,350 kg (7,385 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540/1,000 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Pump flow | 12.9 gpm (48.8 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment