The JCB Fastrac 155 is a four-wheel drive (4WD) tractor manufactured by JCB from 1993 to 1997. The JCB Fastrac 155 is equipped with a 6.0 L (365.2 cu·in) six-cylinder diesel engine and a synchromesh transmission with 36 forward and 12 reverse gears.
The JCB Fastrac 155 4WD tractor used the Perkins 1000-6 T4 engine. It is a 6.0 L, 5,984 cm2, (365.2 cu·in) six-cylinder turbocharged diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 170.4 PS (125.3 kW; 168.0 HP) at 2,400 rpm of output power and 602.0 N·m (61.4 kg·m, 443.7 ft·lb) at 1,400 rpm of torque.
The JCB Fastrac 155 is equipped with power assist steering, pneumatic dry disc brakes, Cab with air conditioning, and 280.0 liters (74 US gal.; 61.6 Imp. gal) fuel tank.
JCB Fastrac 155 Specifications
| General Specifications | |
| Model | JCB Fastrac 155 |
| Length | 5,760 mm (226.8 in) |
| Width | 2,480 mm (97.6 in) |
| Height | 2,890 mm (113.8 in) |
| Wheel base | 3,000 mm (118.1 in) |
| Ground clearance | 480 mm (18.9 in) |
| Weight | 6,520 kg (14,374 lbs) |
| Fuel tank capacity | 280.0 liters (74 US gal.; 61.6 Imp. gal) |
| Battery | Two 12V |
| Cabin type | Cab standard with air conditioning |
| Engine | |
| Engine model | Perkins 1000-6 T4 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 6.0 L, 5,984 cm2, (365.2 cu·in) |
| Bore and stroke | 100.0 mm X 127.0 mm (3.94 in X 5 in) |
| Horsepower | 170.4 PS (125.3 kW; 168.0 HP) at 2,400 rpm |
| Torque | 602.0 N·m (61.4 kg·m, 443.7 ft·lb) at 1,400 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 4WD |
| Steering type | Power assist |
| Brakes | Pneumatic dry disc |
| Differential lock | Electro-hydraulic rear |
| Transmission model | – |
| Transmission type | Synchromesh |
| Gears | 36 forward and 12 reverse |
| Tires | |
| Front tires | Ag: 480/70R30 |
| Rear tires | Ag: 480/70R30 |
| Three-Point Hitch | |
| Caterogy | III/IIIN |
| Control type | Electronic draft control |
| Lift capacity (at ends) | 6,000 kg (13,230 lbs) 7,000 kg (15,435 lbs) |
| Front hitch | |
| Caterogy | II |
| Lift capacity | 3,000 kg (6,615 lbs) |
| PTO (Power take-off shaft) | |
| Front PTO type | Independent |
| Front PTO speed | 540/1,000, 1,000 rpm |
| Rear PTO type | Independent with electro-hydraulic clutch |
| Rear PTO speed | 540/1,000, 1,000 rpm |
| Hydraulic system | |
| Hydraulic type | – |
| Hydraulic capacity | 60.0 L (15.9 US gal, 13.2 Imp. gal) 76.8 L (20.3 US gal, 16.9 Imp. gal) |
| Pressure | 3045 psi (210 bar) |
| Valves | 2 |
| Pump flow | 15.85 gpm (60 lpm) |
Be the first to comment