The JCB Fastrac 1115S is a four-wheel drive tractor manufactured by JCB from 1996 to 1998. The JCB Fastrac 1115S is equipped with a 6.0 L (365.2 cu·in) six-cylinder diesel engine and a synchromesh transmission with ceramic disc clutch and 36 forward and 12 reverse gears.
The JCB Fastrac 1115S four-wheel drive used the Perkins 1000-6 HR1 engine. It is a 6.0 L, 5,984 cm2, (365.2 cu·in) six-cylinder turbocharged diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 131.8 PS (96.9 kW; 130.0 HP) at 2,300 rpm of output power and 523.0 N·m (53.3 kg·m, 385.5 ft·lb) at 1,400 rpm of torque.
The JCB Fastrac 1115S is equipped with hydrostatic power steering, pneumatic dry disc brakes, Cab with air conditioning, and 220.0 liters (58.1 US gal.; 48.4 Imp. gal) fuel tank.
JCB Fastrac 1115S Specifications
| General Specifications | |
| Model | JCB Fastrac 1115S |
| Length | 5,150 mm (202.8 in) |
| Width | 2,310 mm (90.9 in) |
| Height | 2,790 mm (109.8 in) |
| Wheel base | 2,790 mm (109.8 in) |
| Ground clearance | 450 mm (17.7 in) |
| Weight | 5,850 kg (12,897 lbs) |
| Fuel tank capacity | 220.0 liters (58.1 US gal.; 48.4 Imp. gal) |
| Battery | 12V, 83Ah |
| Cabin type | Cab with air conditioning |
| Engine | |
| Engine model | Perkins 1000-6 HR1 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 6.0 L, 5,984 cm2, (365.2 cu·in) |
| Bore and stroke | 100.0 mm X 127.0 mm (3.94 in X 5 in) |
| Horsepower | 131.8 PS (96.9 kW; 130.0 HP) at 2,300 rpm |
| Torque | 523.0 N·m (53.3 kg·m, 385.5 ft·lb) at 1,400 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 4WD |
| Steering type | Hydrostatic power |
| Brakes | Pneumatic dry disc |
| Transmission model | – |
| Transmission type | Synchromesh with ceramic disc clutch |
| Gears | 36 forward and 12 reverse |
| Tires | |
| Front tires | Ag: 480/70R28 |
| Rear tires | Ag: 480/70R28 |
| Three-Point Hitch | |
| Caterogy | II or III (optional) |
| Control type | – |
| Lift capacity (at ends) | 5,250 kg (11,575 lbs) |
| Front Hitch | |
| Caterogy | II |
| Lift capacity (at ends) | 2,550 kg (5,625 lbs) |
| PTO (Power take-off shaft) | |
| Front PTO type | Independent |
| Front PTO speed | 540/1,000 rpm |
| Rear PTO type | Independent |
| Rear PTO speed | 540/1,000 rpm |
| Hydraulic system | |
| Hydraulic type | – |
| Hydraulic capacity | 75.0 L (19.8 US gal, 16.5 Imp. gal) |
| Pressure | 3045 psi (210 bar) |
| Valves | 2 or 3 |
| Pump flow | 19.6 gpm (74.2 lpm) 24.3 gpm (92 lpm) |
Be the first to comment